Switch to a macro `ZSTD_FALLTHROUGH;` instead of a comment. On supported
compilers this uses an attribute, otherwise it becomes a comment.
This is necessary to be compatible with clang's `-Wfall-through`, and
gcc's `-Wfall-through=2` which don't support comments. Without this the
linux build emits a bunch of warnings.
Also add a test to CI to ensure that we don't regress.
turns out, it's possible to constify MatchState* parameter
in some parts of the binary tree algorithm,
making it a pure read-only parameter,
as opposed to a mutable state.
This is supposed to be helpful for both maintenance and the compiler.
* Extract out common portion of `lib/Makefile` into `lib/libzstd.mk`.
Most relevantly, the way we find library files.
* Use `lib/libzstd.mk` in the other Makefiles instead of repeating the
same code.
* Add a test `tests/test-variants.sh` that checks that the builds of
`make -C programs allVariants` are correct, and run it in Actions.
* Adds support for ASM files in the CMake build.
The Meson build is not updated because it lists every file in zstd,
and supports ASM off the bat, so the Huffman ASM commit will just add
the ASM file to the list.
The Visual Studios build is not updated because I'm not adding ASM
support to Visual Studios yet.
Test failures showed up on the daily cron job. They didn't show up
in CI because the condition is somewhat rare, and didn't trigger
during the CI tests.
This PR fixes up the logic in `findSynchronizationPoint()` to correctly
handle the edge case. It also un-comments an assert that helps catch the
issue, and verify that rsyncable mode is calculating the correct hash.
After the fix, the test that failed passes:
```
./zstreamtest --newapi -t1 --no-big-tests -s9680
```
In degenerate cases `--rsyncable` could create very small blocks (1
byte). This causes the compressed output to be larger than
`ZSTD_compressBound()`. Fix the issue by ensuring that rsyncable mode
never outputs blocks smaller than 128 KB.
The minimum job size is 512 KB, so we shouldn't lose many
synchronization points from skipping any that cause blocks smaller than
128 KB. And even if we do, that is fine, because we'll find the next
one.
This fixes the `raw_dictionary_round_trip` oss-fuzz assert.
Credit to OSS-Fuzz
better for large files, and sources with relatively "stable" entropy,
like silesia.tar.
slightly worse for files with rapidly changing entropy,
like Calgary.tar/.
Updated small files tests in fuzzer
used to be necessary to counter-balance the fixed-weight frequency update
which has been recently changed for an adaptive rate (targeting stable starting frequency stats).
As a library, the default shouldn't be to write anything on console.
`cover` and `fastcover` have a `g_displayLevel` variable to control this behavior.
It's now set to 0 (no display) by default.
Setting notification to a higher level should be an explicit operation by a console application.
This new setup is slighly better on `silesia.tar` :
Ratio : 3.649 -> 3.655
Speed : 11.9 MB/s -> 12.2 MB/s
At the cost of more memory : 24 MB -> 32 MB
The new memory budget is a reasonable interpolation between neighboring levels 12 and 14:
level 12 : 24 MB
level 13 : 32 MB (increased from 24 MB)
level 14 : 48 MB
Window size remains unaffected (4 MB)
This removes the old `ZSTD_compressBlock_fast_generic()` and renames the new
`ZSTD_compressBlock_fast_generic_pipelined()` to replace it. This is
functionally a no-op.
Unrolling the loop to handle 2 positions in each iteration allows us to reduce
the frequency of some operations that don't need to happen at every position.
One such operation is the step calculation, which is a very rough heuristic
anyways. It's fine if we do this a position later. The other operation is the
repcode check. But since the repcode check already tries expanding back one
position, we're really not missing much of importance by only trying it every
other position.
This commit also slightly reorders some operations.
Amusingly, it seems to be a non-trivial performance hit to add in final
searches or even hash table insertions during cleanup. So let's not. It seems
to not make any meaningful difference in compression ratio.
* Add a Huffman round trip fuzzer
* Fix two minor bugs in Huffman that aren't exposed in zstd
- Incorrect weight comparison (weights are allowed to be equal to
table log).
- HUF_compress1X_usingCTable_internal() can return compressed
size >= source size, so the assert that `cSize <= 65535` isn't
correct, and it needs to be checked instead.
This PR fixes an incorrect comparison in figuring out `minChain` in
`ZSTD_dedicatedDictSearch_lazy_loadDictionary()`. This incorrect comparison
had been masked by the fact that `idx` was always 1, until @terrelln changed
that in #2726.
Credit-to: OSS-Fuzz
The DUBT can be non-deterministic if an index is equal to
`ZSTD_DUBT_UNSORTED_MARK`. Ensure that never happens by starting the
indices at 2.
This bug was found by the OSS-Fuzz determinism fuzzer. With this change
the fuzzer test passes. And I've confirmed that this is the root cause,
not just hiding the problem.
Aside: This took me a long time to figure out, because I thought I had
tried this first thing. But, apparantly I messed it up, because when I
was going through it again with @felixhandte, I was pointing out that it
wasn't the case, but it turns out it was.
Credit to: OSS-Fuzz
* The block splitter missed a bounds check, so when the buffer is too small it
passes an erroneously large size to `ZSTD_entropyCompressSeqStore()`, which
can then write the compressed data past the end of the buffer. This is a new
regression in v1.5.0 when the block splitter is enabled. It is either enabled
explicitly, or implicitly when using the optimal parser and `ZSTD_compress2()`
or `ZSTD_compressStream*()`.
* `HUF_writeCTable_wksp()` omits a bounds check when calling
`HUF_compressWeights()`. If it is called with `dstCapacity == 0` it will pass
an erroneously large size to `HUF_compressWeights()`, which can then write
past the end of the buffer. This bug has been present for ages. However, I
believe that zstd cannot trigger the bug, because it never calls
`HUF_compress*()` with `dstCapacity == 0` because of [this check][1].
Credit to: Oss-Fuzz
[1]: 89127e5ee2/lib/compress/zstd_compress_literals.c (L100)
* Flatten ZSTD_row_getMatchMask
* Remove the SIMD abstraction layer.
* Add big endian support.
* Align `hashTags` within `tagRow` to a 16-byte boundary.
* Switch SSE2 to use aligned reads.
* Optimize scalar path using SWAR.
* Optimize neon path for `n == 32`
* Work around minor clang issue for NEON (https://bugs.llvm.org/show_bug.cgi?id=49577)
* replace memcpy with MEM_readST
* silence alignment warnings
* fix neon casts
* Update zstd_lazy.c
* unify simd preprocessor detection (#3)
* remove duplicate asserts
* tweak rotates
* improve endian detection
* add cast
there is a fun little catch-22 with gcc: result from pmovmskb has to be cast to uint32_t to avoid a zero-extension
but must be uint16_t to get gcc to generate a rotate instruction..
* more casts
* fix casts
better work-around for the (bogus) warning: unary minus on unsigned
Even with -fvisibility=hidden added to CFLAGS, any symbol which is
given a default visibility attribute ends up exported in the dynamic
library. This happens through zstd_internal.h which defines
..._STATIC_LINKING_ONLY before including various header files, and is
included for example in lib/common/pool.c.
To avoid this, this patch distinguishes static and non-static APIs, by
using ZSTDLIB_API only for the latter, and introducing
ZSTDLIB_STATIC_API for the former. For now, both are exported, but
non-static APIs can be hidden by overriding the definition
ZSTDLIB_STATIC_API. lib/Makefile is modified to allow this using
make CPPFLAGS_DYNLIB=-DZSTDLIB_STATIC_API=ZSTDLIB_HIDDEN
In addition, API declarations are dropped from zstd_compress.c (they
aren't needed there).
Signed-off-by: Stephen Kitt <steve@sk2.org>
Call `ZSTD_enforceMaxDist()` before each block with the beginning of the
block. This ensures that `lowLimit` is updated to `dictLimit` whenever
the ext-dict is out of range, so we can use prefix mode for speed.
This can cause non-determinism because prefix mode and ext-dict mode
match finders can return different results. It can also hurt speed
because ext-dict match finders are slower.
The scenario is:
1. Compress large data with a dictionary.
2. The dictionary goes out of bounds, so we invalidate it.
3. However, we still have `lowLimit < dictLimit`, since it is
never updated.
4. We will call the ext-dict match finder instead of the prefix one.
The repcode checks disallowed repcodes that are equal to `windowLow`.
This is slightly inefficient, but isn't a problem on its own. Together
with the next commit, it cause non-determinism.
`ZSTD_insertBt1()` has a speed optimization that skips the prefix of
very long matches.
40def70387/lib/compress/zstd_opt.c (L476)
This optimization is based off the length longest match found. However,
when indices are reset, we only ensure that we can reference the whole
window starting from `ip`. If the previous block ended with a long match
then `nextToUpdate` could be much less than `ip`. It might be far enough
back that `nextToUpdate < maxDist`, so it doesn't have a full window of
data to reference. This can cause non-determinism bugs, because we may
find a match that is beyond `ip - maxDist`, and may sometimes be
un-referencable, and that match triggers the speed optimization.
The fix is to base the `windowLow` off of the `target` of
`ZSTD_updateTree_internal()`, because anything below that value will be
obsolete by the time `ZSTD_updateTree_internal()` completes.
and restored limit to 256 when in 64-bit mode
(it was reduced to 200 to give more room for 32-bit).
This should fix test instability issues
using lot of threads in 32-bit environments.
Linearly back off the frequency of overflow correction based on the
number of times the `ZSTD_window_t` has been overflow corrected. This
will still allow the fuzzer to quickly find overflow correction bugs,
while also keeping good speed for larger inputs.
Additionally, the `nbOverflowCorrections` variable can be useful for
debugging coredumps, since we can inspect the `ZSTD_CCtx` to see if
overflow correction has happened yet.
I've verified this fixes the timeouts in OSS-Fuzz (176 seconds -> 6
seconds). I've also verified that fuzzers and `fuzzer` and `zstreamtest`
still catch the row-hash overflow correction bug.
This flag forces zstd to always load the prefix in ext-dict mode, even
if it happens to be contiguous, to force determinism. It also applies to
dictionaries that are re-processed.
A determinism test case is also added, which fails without
`ZSTD_c_deterministicRefPrefix` and passes with it set.
Question: Should this be the default behavior? It isn't in this PR.
* Take `params` by const reference in `ZSTD_resetCCtx_internal()`.
* Add `simpleApiParams` to the CCtx and use them in the simple API
functions, instead of creating those parameters on the stack.
I think this is a good direction to move in, because we shouldn't need
to worry about adding parameters to `ZSTD_CCtx_params`, since it should
always be on the heap (unless they become absoultely gigantic).
Some `ZSTD_CCtx_params` are still on the stack in the CDict functions,
but I've left them for now, because it was a little more complex, and we
don't use those functions in stack-constrained currently.
Dictionaries larger than `ZSTD_CHUNKSIZE_MAX` used to have to be loaded
in multiple segments. Instead, when we detect large dictionaries, ensure
that we reset the context's indicies. Then, for dictionaries larger than
`ZSTD_CURRENT_MAX - 1`, only load the suffix of the dictionary. Finally,
enable DDS for large dictionaries, since we no longer load in multiple
segments.
This simplifes the dictionary loading code, and reduces opportunities
for non-determinism to slip in.
previous lower limit was 1 MB.
Note : by default, the lowest job size is 2 MB, achieved at level 1.
Even lower job sizes can be achieved by manipulating this value directly,
or manually modifying window sizes to lower amounts.
Updated unit test to ensure that this new limit works fine
(test would fail with previous 1 MB limit).
LDM does especially poorly on repetitive data when that data's hash happens
to have `(hash & stopMask) == 0`. Either because the `stopMask == 0` or
random chance. Optimize this case by skipping over repetitive patterns.
The detection is very simplistic, but should catch most of the offending
cases.
```
head -c 1G /dev/zero | perf stat -- ./zstd -1 -o /dev/null -v --zstd=ldmHashRateLog=1 --long
21.187881087 seconds time elapsed
head -c 1G /dev/zero | perf stat -- ./zstd -1 -o /dev/null -v --zstd=ldmHashRateLog=1 --long
1.149707921 seconds time elapsed
```
* Fix overflow correction when `windowLog < cycleLog`. Previously, we
got the correction wrong in this case, and our chain tables and binary
trees would be corrupted. Now, we work as long as `maxDist` is a power
of two, by adding `MAX(maxDist, cycleSize)` to our indices.
* When `ZSTD_WINDOW_OVERFLOW_CORRECT_FREQUENTLY` is defined to non-zero
run overflow correction as frequently as allowed without impacting
compression ratio.
* Enable `ZSTD_WINDOW_OVERFLOW_CORRECT_FREQUENTLY` in `fuzzer` and
`zstreamtest` as well as all the OSS-Fuzz fuzzers. This has a 5-10%
speed penalty at most, which seems reasonable.
Instead of providing a default no-op implementation, check the symbols
for `NULL` before accessing them. Providing a default implementation
doesn't reliably work with dynamic linking. Depending on link order the
default implementations may not be overridden. By skipping the default
implementation, all link order issues are resolved. If the symbols
aren't provided the weak function will be `NULL`.
* Perform 64-byte alignment of wksp tables and aligneds internally
* Clean up cwskp_finalize() function to only do two allocs
* Refactor aligned/buffer reservation code, remove ASAN req for alignment reservations
* Change from allocating 128 bytes always to allocating only buffer space as needed for tables/aligned
* Back out aligned/table reservation order restriction
* Add stricter bounds for new/resized wksps, fix comment in zstd_cwksp.h
* Do not emit last partitions of blocks as RLE/uncompressed
* Fix repcode updates within block splitter
* Add a entropytables confirm function, redo ZSTD_confirmRepcodesAndEntropyTables() for better function signature
* Add a repcode updater to block splitter, no longer need to force emit compressed blocks
* Switch to yearless copyright per FB policy
* Fix up SPDX-License-Identifier lines in `contrib/linux-kernel` sources
* Add zstd copyright/license header to the `contrib/linux-kernel` sources
* Update the `tests/test-license.py` to check for yearless copyright
* Improvements to `tests/test-license.py`
* Check `contrib/linux-kernel` in `tests/test-license.py`
The simple compression functions are intended to ignore the advanced
parameters, but they were accidentally using them. All the
`ZSTD_parameters` were set correctly, but any extra parameters were
used as-is. E.g. `ZSTD_c_format`.
This PR makes all the simple single-pass functions listed below ignore
the advanced parameters, as intended.
* `ZSTD_compressCCtx()`
* `ZSTD_compress_usingDict()`
* `ZSTD_compress_usingCDict()`
* `ZSTD_compress_advanced()`
* `ZSTD_compress_usingCDict_advanced()`
It also adds a test case that ensures that each of these functions
ignore the advanced parameters.
Forward the correct compressionLevel to the appliedParams in all cases.
It was already correct for the advanced API, so only the old single-pass
functions needed to be fixed.
This compression level is unused by the library, but is set so that the
tracing framework can consume it.
The most common information that you want to track between begin() and
end() is the timestamp of the begin function, so you can measure the
duration of the (de)compression call. Allow the tracing library to put
this information inside the `ZSTD_TraceCtx`, so it doesn't need to keep
a global map in this case. If a single uint64_t is not enough, the
tracing library can return a unique identifier (like the context
pointer) instead, and use it as a key in a map.
This keeps the simple case simple.
Treat ZSTD_getCParams() and ZSTD_adjustCParams() in the same way
we treat streaming compression. Choose parameters based on the
dictionary size + source size, and assume the source size is small
if unkown. But, don't shrink the window log down in
ZSTD_adjustCParams_internal().
Fixes#2442.
1. When creating a dictionary keep the same behavior as before.
Assume the source size is 513 bytes when adjusting parameters.
2. When calling ZSTD_getCParams() or ZSTD_adjustCParams() keep
the same behavior as before.
3. When attaching a dictionary keep the same behavior of ignoring
the dictionary size. When streaming this will select the
largest parameters and not adjust them down. But, the CDict
will use the correctly sized parameters, which seems like the
right tradeoff.
4. When not attaching a dictionary (either forced not to, or
using a prefix dictionary) we select parameters based on the
dictionary size + source size, and assume the source size is
small, which is the same behavior as before. But, now we don't
adjust the window log (and hash and chain log) down when the
source size is unknown.
When the source size is unknown all cdicts should attach, except
when the user disables attaching, or `forceWindow` is used. This
means that when streaming with a CDict we end up in the good case
where we get small CDict parameters, and large source parameters.
TODO: Add a streaming + dictionary regression test case.
Comment and refactor `HUF_buildCTable()` and the helper functions
it calls as I read and understand the code. Hopefully this refactor
makes the code a bit more clear.
