This replicates the behavior of @terrelln's `ZSTD_fast` implementation. That
is, it always looks at adjacent pairs of positions, and only applies the
acceleration every other position. This produces a more fine-grained
acceleration.
no idea why visual + clang-cl + appveyor don't like them,
I've not been able to reproduce the issue locally,
but these static assert are very unlikely to deliver a useful signal,
I can't imagine a situation where they will be wrong,
and if they are, then a ton of other things will be broken way before reaching that point.
Move portability macros to `lib/common/portability_macros.h`. This file
only contains platform/feature detection (e.g. 0/1 macros). This file is
shared between C and ASM code, so it cannot include any C code.
Rename `HUF_` ASM macros to be `ZSTD_` prefixed, and move to the new
header.
Restrict `ZSTD_ASM_SUPPORTED` to `__GNUC__`, because we need the GAS
assembler.
Finally, only include the ASM code if we are actually going to use it.
This disables it on all Windows platforms, which should resolve the
problem brought up in Issue #2789.
Use the same trick as we did for zstd_lazy in PR #2828:
* Create one search function specialization for each (dictMode, mls).
* Select the search function pointer at the top of the match finder.
Additionally, we no longer inline `ZSTD_compressBlock_opt_generic` into
every function, since `dictMode` is no longer used as a template. Create
two specializations, for opt levels 0 and 2, and call one of the two
specializations.
Lastly, remove the hack that disabled inlining for zstd_opt for the
Linux Kernel, as we've gotten most of the benefit already.
Compilation time sees a ~4x reduction:
| Compiler | Flags | Dev Time (s) | PR Time (s) | Delta |
|----------|----------------------------------|--------------|-------------|-------|
| gcc | -O3 | 10.1 | 2.3 | -77% |
| gcc | -O3 -fsanitize=address,undefined | 61.1 | 10.2 | -83% |
| clang | -O3 | 9.0 | 2.1 | -76% |
| clang | -O3 -fsanitize=address,undefined | 33.5 | 5.1 | -84% |
Build size is reduced by 150KB - 200KB:
| Compiler | Dev libzstd.a Size (B) | PR libzstd.a Size (B) | Delta |
|----------|------------------------|-----------------------|-------|
| gcc | 1327476 | 1177108 | -11% |
| clang | 1378324 | 1167780 | -15% |
There is a <2% speed loss in all cases:
| Compiler | Level | Dev Speed (MB/s) | PR Speed (MB/s) | Delta |
|----------|-------|------------------|-----------------|--------|
| gcc | 16 | 4.78 | 4.72 | -1.25% |
| gcc | 17 | 3.49 | 3.46 | -0.85% |
| gcc | 18 | 2.92 | 2.86 | -2.04% |
| gcc | 19 | 2.61 | 2.61 | 0.00% |
| clang | 16 | 4.69 | 4.80 | 2.34% |
| clang | 17 | 3.53 | 3.49 | -1.13% |
| clang | 18 | 2.86 | 2.85 | -0.34% |
| clang | 19 | 2.61 | 2.61 | 0.00% |
Fixes Issue #2862.
`lib/deprecated` is no longer built by zstd's bundled build files. However,
users may try to build these files when they import the source tree into
their own build systems. And if they have `-Wdeprecated-declarations` on,
this can produce warnings.
This PR migrates these files away from using deprecated declarations.
This addresses #2767.
because mem.h is dropped in the Linux kernel.
Changed macro definition order (gcc/clang/msvc before c11)
due to a limitation in the kernel source builder.
Changed the backup to sizeof(),
reverting to previous behavior when no support of alignof() is detected.
short-tests-0 were silently failing. I think because of the && make clean construction. Switch to ; instead.
Also fix all the test failures that were exposed.
`make all` is failing on CircleCI because it is missing Docker. Move that test
to GitHub actions, and switch the pedantic CircleCI test to `make allmost`.
Allow the `dictContentSize` to be any size. The finalized dictionary
content size must be at least as large as the maximum repcode (8). So we
add zero bytes to the dictionary to ensure that we meet that
requirement.
I've removed this restriction because its been causing us headaches when
people complain that dictionary training failed. It fails because there
isn't enough useful content to put in the dictionary. Either because
every sample is exactly the same and less than ZDICT_CONTENTSIZE_MIN bytes,
or there isn't enough content. Instead, we should succeed in creating
the dictionary, and it is up to the user to decide if it is worthwhile.
It is possible that the tables alone provide enough value.
NOTE: This allows us to produce dictionaries with finalized
`dictContentSize < ZDICT_CONTENTSIZE_MIN`. But, they are still valid
zstd dictionaries. We could remove the `ZDICT_CONTENTSIZE_MIN` macro,
but I've decided to leave that for now, so we don't break users.
* When dynamic dispatching to bmi2 add lzcnt and bmi to the
TARGET_ATTRIBUTE.
* Centralize the bmi2 TARGET_ATTRIBUTE definition to
BMI2_TARGET_ATTRIBUTE so we can change it in the future.
* Only enable bmi2 when both bmi1 & bmi2 are supported. There shouldn't
be any cases where bmi2 is supported but bmi1 isn't. But, since we are
using the instruction we should check bmi1 as well.
PR #2850 attempted to fix a determinism bug that was uncovered by OSS-Fuzz. It
succeeded in addressing that source of non-determinism, but introduced a new
one: it was possible, when index reduction occurred, to map indices in the
window to the reserved value, which would cause them to be zeroed, potentially
altering parsing of the input.
This PR addresses this issue. It makes sure that the bottom of the window is
always `>= ZSTD_WINDOW_START_INDEX`.
I'm not sure if this makes #2850 redundant. I think it's probably still
valuable to have that protection as well.
Credit to OSS-Fuzz for discovering this issue.
The optimal parser is unlikely to be used in the linux kernel in
practice. There is no reason these functions should be force inlined,
since we aren't gaining anything, and are losing build size.
| Compiler | Before (Bytes) | After (Bytes) | Delta (Bytes) |
|----------|----------------|---------------|---------------|
| gcc-11 | 1142090 | 952754 | -189336 |
| clang-12 | 1228402 | 976290 | -252112 |
This is a temporary solution pending the resolution of PR #2862 in the
`dev` branch.
Take the same approach as in PR #2828 [0] to remove functions that force
inline many function bodies and `switch`. Instead, create one function per
"template" combination, and then switch between these functions. This
allows the compiler to break the large function into many small
functions, which generally helps codegen.
Also, in the `extDict` modes when there is no ext-dict, call the top
level function instead of the force inlined one, to save on code size.
I'm specifically doing this because gcc on the parisc architecture doesn't
handle the large function body well, and ends up using a lot of excess
stack space. Outlining these functions fixes it.
Putting stack marking into every assembly files is required to indicate
that the stack does not need to be executable.
Executable flag on stack conflicts with some security measures, Systemd
MemoryDenyWriteExecute=yes for example.
Previously, if an index was equal to `reducerValue + 1`, it would get remapped
during index reduction to 1 i.e. `ZSTD_DUBT_UNSORTED_MARK`. This can affect the
parsing of the input slightly, by causing tree nodes to be nullified when they
otherwise wouldn't be. This hardly matters from a correctness or efficiency
perspective, but it does impact determinism.
So this commit changes index reduction to avoid mapping indices to collide with
`ZSTD_DUBT_UNSORTED_MARK`.
that's clearer than finding the tables somewhere in the middle of `compress.c`.
Also, down the line, it may potentially allows zstd to feature adjusted tables depending on target cpu.
Speed up compilation times by moving each specialized search function
into its own function. This is faster because compilers can handle many
smaller functions much faster than one gigantic function. The previous
approach generated one giant function with `switch` statements and
inlining to select the implementation.
| Compiler | Flags | Dev Time (s) | PR Time (s) | Delta |
|----------|-------------------------------------|--------------|-------------|-------|
| gcc | -O3 | 16.5 | 5.6 | -66% |
| gcc | -O3 -g -fsanitize=address,undefined | 158.9 | 38.2 | -75% |
| clang | -O3 | 36.5 | 5.5 | -85% |
| clang | -O3 -g -fsanitize=address,undefined | 27.8 | 17.5 | -37% |
This also reduces the binary size because the search functions are no
longer inlined into the main body.
| Compiler | Dev libzstd.a Size (B) | PR libzstd.a Size (B) | Delta |
|----------|------------------------|-----------------------|-------|
| gcc | 1563868 | 1308844 | -16% |
| clang | 1924372 | 1376020 | -28% |
Finally, the performance is not impacted significantly by this change,
in fact we generally see a small speed boost.
| Compiler | Level | Dev Speed (MB/s) | PR Speed (MB/s) | Delta |
|----------|-------|------------------|-----------------|-------|
| gcc | 5 | 110.6 | 110.0 | -0.5% |
| gcc | 7 | 70.4 | 72.2 | +2.5% |
| gcc | 9 | 53.2 | 53.5 | +0.5% |
| gcc | 13 | 12.7 | 12.9 | +1.5% |
| clang | 5 | 113.9 | 110.4 | -3.0% |
| clang | 7 | 67.7 | 70.6 | +4.2% |
| clang | 9 | 51.9 | 52.2 | +0.5% |
| clang | 13 | 12.4 | 13.3 | +7.2% |
The compression strategy is unmodified in this PR, so the compressed size
should be exactly the same. I may have a follow up PR to slightly improve
the compression ratio, if it doesn't cost too much speed.
Fix underflow of `nbCompares` by switching to an `int` and comparing
`nbCompares > 0`. This is a minimal fix, because I don't want to change
the logic. These loops seem to be doing `nbCompares + 1` comparisons.
The bug was reported by Dan Carpenter and found by Smatch static
checker.
https://lore.kernel.org/all/20211008063704.GA5370@kili/
There is no minimum value check, so the parameter could be negative.
Switch to the standard pattern of using `BOUNDCHECK()`.
The bug was reported by Dan Carpenter and found by Smatch static
checker.
https://lore.kernel.org/all/20211008063704.GA5370@kili/
Since we're now hashing the position ahead even if we find a long match and
don't search that next position, we can write it back into the hashtable even
in long matches. This seems to cost us no speed, and improves compression
ratio slightly!
Aside from maybe a latency win in the loop, this means that when we find a
short match, we've already done the hash we need to check the next long match.
* Limit training samples size to 2GB
* simplified DISPLAYLEVEL() macro to use global vqriable instead of local.
* refactored training samples loading
* fixed compiler warning
* addressed comments from the pull request
* addressed @terrelln comments
* missed some fixes
* fixed type mismatch
* Fixed bug passing estimated number of samples rather insted of the loaded number of samples.
Changed unit conversion not to use bit-shifts.
* fixed a declaration after code
* fixed type conversion compile errors
* fixed more type castting
* fixed more type mismatching
* changed sizes type to size_t
* move type casting
* more type cast fixes
PR #2784 introduced a bug in the decompressor that caused some valid
inputs to fail to decompress. The bitstream isn't reloaded after the 4X*
loop if the number of elements remaining is small enough, causing us to
read more bits than are available in the bitcontainer.
This was caught by the MSAN fuzzer in OSS-Fuzz because the assembly
implementation isn't used in the MSAN build.
Credit to OSS-Fuzz.
Multiple ZSTD_createDCtx* functions call other (public)
ZSTD_createDCtx* functions, this makes it harder for humans
and compilers to throw out code that is not used.
This farms out the logic into a static function, if a program
only uses a single ZSTD_createDCtx variant, all others can be easily
dropped and the remaining implementation can be specialized.
Commit d7ef97a013
("[build] Fix oss-fuzz build with the dataflow sanitizer") broke
build inside Linux-kernel after 'import', as it no longer can
conditionally remove ZSTD_MEMORY_SANITIZER definition from
the #if DEF_A || DEF_B block. This emits -Wundef warning which
can be treated as error.
Split this preprocessor condition into two separate conditions
to fix this.
Fixes: d7ef97a013 ("[build] Fix oss-fuzz build with the dataflow sanitizer")
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Switch to a macro `ZSTD_FALLTHROUGH;` instead of a comment. On supported
compilers this uses an attribute, otherwise it becomes a comment.
This is necessary to be compatible with clang's `-Wfall-through`, and
gcc's `-Wfall-through=2` which don't support comments. Without this the
linux build emits a bunch of warnings.
Also add a test to CI to ensure that we don't regress.
turns out, it's possible to constify MatchState* parameter
in some parts of the binary tree algorithm,
making it a pure read-only parameter,
as opposed to a mutable state.
This is supposed to be helpful for both maintenance and the compiler.
* Extract out common portion of `lib/Makefile` into `lib/libzstd.mk`.
Most relevantly, the way we find library files.
* Use `lib/libzstd.mk` in the other Makefiles instead of repeating the
same code.
* Add a test `tests/test-variants.sh` that checks that the builds of
`make -C programs allVariants` are correct, and run it in Actions.
* Adds support for ASM files in the CMake build.
The Meson build is not updated because it lists every file in zstd,
and supports ASM off the bat, so the Huffman ASM commit will just add
the ASM file to the list.
The Visual Studios build is not updated because I'm not adding ASM
support to Visual Studios yet.
Test failures showed up on the daily cron job. They didn't show up
in CI because the condition is somewhat rare, and didn't trigger
during the CI tests.
This PR fixes up the logic in `findSynchronizationPoint()` to correctly
handle the edge case. It also un-comments an assert that helps catch the
issue, and verify that rsyncable mode is calculating the correct hash.
After the fix, the test that failed passes:
```
./zstreamtest --newapi -t1 --no-big-tests -s9680
```
In degenerate cases `--rsyncable` could create very small blocks (1
byte). This causes the compressed output to be larger than
`ZSTD_compressBound()`. Fix the issue by ensuring that rsyncable mode
never outputs blocks smaller than 128 KB.
The minimum job size is 512 KB, so we shouldn't lose many
synchronization points from skipping any that cause blocks smaller than
128 KB. And even if we do, that is fine, because we'll find the next
one.
This fixes the `raw_dictionary_round_trip` oss-fuzz assert.
Credit to OSS-Fuzz
better for large files, and sources with relatively "stable" entropy,
like silesia.tar.
slightly worse for files with rapidly changing entropy,
like Calgary.tar/.
Updated small files tests in fuzzer
used to be necessary to counter-balance the fixed-weight frequency update
which has been recently changed for an adaptive rate (targeting stable starting frequency stats).
As a library, the default shouldn't be to write anything on console.
`cover` and `fastcover` have a `g_displayLevel` variable to control this behavior.
It's now set to 0 (no display) by default.
Setting notification to a higher level should be an explicit operation by a console application.
This new setup is slighly better on `silesia.tar` :
Ratio : 3.649 -> 3.655
Speed : 11.9 MB/s -> 12.2 MB/s
At the cost of more memory : 24 MB -> 32 MB
The new memory budget is a reasonable interpolation between neighboring levels 12 and 14:
level 12 : 24 MB
level 13 : 32 MB (increased from 24 MB)
level 14 : 48 MB
Window size remains unaffected (4 MB)
This removes the old `ZSTD_compressBlock_fast_generic()` and renames the new
`ZSTD_compressBlock_fast_generic_pipelined()` to replace it. This is
functionally a no-op.
Unrolling the loop to handle 2 positions in each iteration allows us to reduce
the frequency of some operations that don't need to happen at every position.
One such operation is the step calculation, which is a very rough heuristic
anyways. It's fine if we do this a position later. The other operation is the
repcode check. But since the repcode check already tries expanding back one
position, we're really not missing much of importance by only trying it every
other position.
This commit also slightly reorders some operations.
Amusingly, it seems to be a non-trivial performance hit to add in final
searches or even hash table insertions during cleanup. So let's not. It seems
to not make any meaningful difference in compression ratio.
* Add a Huffman round trip fuzzer
* Fix two minor bugs in Huffman that aren't exposed in zstd
- Incorrect weight comparison (weights are allowed to be equal to
table log).
- HUF_compress1X_usingCTable_internal() can return compressed
size >= source size, so the assert that `cSize <= 65535` isn't
correct, and it needs to be checked instead.
This PR fixes an incorrect comparison in figuring out `minChain` in
`ZSTD_dedicatedDictSearch_lazy_loadDictionary()`. This incorrect comparison
had been masked by the fact that `idx` was always 1, until @terrelln changed
that in #2726.
Credit-to: OSS-Fuzz
The DUBT can be non-deterministic if an index is equal to
`ZSTD_DUBT_UNSORTED_MARK`. Ensure that never happens by starting the
indices at 2.
This bug was found by the OSS-Fuzz determinism fuzzer. With this change
the fuzzer test passes. And I've confirmed that this is the root cause,
not just hiding the problem.
Aside: This took me a long time to figure out, because I thought I had
tried this first thing. But, apparantly I messed it up, because when I
was going through it again with @felixhandte, I was pointing out that it
wasn't the case, but it turns out it was.
Credit to: OSS-Fuzz
