Dictionaries are prebuilt and saved as part of the data object.
The config decides whether or not to use the dictionary if it is
available. Configs that require dictionaries are only run with
data that have dictionaries. The method will skip configs that are
irrelevant, so for example ZSTD_compress() will skip configs with
dictionaries.
I've also trimmed the silesia source to 1MB per file (12 MB total),
and added 500 samples from the github data set with a dictionary.
I've intentionally added an extra line to the `results.csv` to make
the nightly build fail, so that we can see how CircleCI reports it.
Full list of changes:
* Add pre-built dictionaries to the data.
* Add `use_dictionary` and `no_pledged_src_size` flags to the config.
* Add a config using a dictionary for every level.
* Add a config that specifies no pledged source size.
* Support dictionaries and streaming in the `zstdcli` method.
* Add a context-reuse method using `ZSTD_compressCCtx()`.
* Clean up the formatting of the `results.csv` file to align columns.
* Add `--data`, `--config`, and `--method` flags to constrain each
to a particular value. This is useful for debugging a failure
or debugging a particular config/method/data.
ZSTD_compress_generic() is renamed ZSTD_compressStream2().
Note that, for the time being,
the "stable" API and advanced one use different parameter planes :
setting parameters using the advanced API does not influence ZSTD_compressStream()
and using ZSTD_initCStream() does not influence parameters for ZSTD_compressStream2().
The regression tests run nightly or on the `regression`
branch for convenience. The results get uploaded as the
artifacts of the job. If they change, check the diff
printed in the job. If all is well, download the new
results and commit them to the repo.
This code will only run on a UNIX like platform. It
could be made to run on Windows, but I don't think that
it is necessary. It also uses C99.
* data: This module defines the data to run tests on.
It downloads data from a URL into a cache directory,
checks it against a checksum, and unpacks it. It also
provides helpers for accessing the data.
* config: This module defines the configs to run tests
with. A config is a set of API parameters and a set of
CLI flags.
* result: This module is a helper for method that defines
the result type.
* method: This module defines the compression methods
to test. It is what runs the regression test using the
data and the config. It reports the total compressed
size, or an error/skip.
* test: This is the test binary that runs the tests for
every (data, config, method) tuple, and prints the
results to the output file and stderr.
* results.csv: The results that the current commit is
expected to produce.
answering #1407.
Also : removed obsolete function ZSTD_setDStreamParameter()
which could only be used with one parameter (DStream_p_maxWindowSize).
Now replaced by ZSTD_DCtx_setWindowSize() (which exists since a few revisions)
changed workspace parameter convention
to always provide workspaceSize,
so that size can be explicitly checked.
Also, use more enum to make the meaning of some parameters more explicit.
fix#1385
decompressing into NULL was an automatic error.
It is now allowed, as long as the content of the frame is empty.
Seems to simplify things for `arrow`.
Maybe some other projects rely on this behavior ?
fix#1379
decodecorpus was generating one extraneous byte when `nbSeq==0`.
This is disallowed by the specification.
The reference decoder was just skipping the extraneous byte.
It is now stricter, and flag such situation as an error.
and slightly refactored affected function.
Honestly, the formula calculating variance should get a second reviewing round,
it's not clear if it's correct.
We could allocate up to 2^28 bytes of memory when using 2 threads with
window log = 24. Now, we limit it to 2^26 bytes of memory when not running
big tests.
I chose max window log = 22 since that is the maximum source size when
big tests are disabled. Hopefully this will be enough to reduce or
eliminate the test failures.
experimental function ZSTD_compressBlock() is designed for very small data in mind,
for situation where saving the ~12 bytes of frame header can actually make a difference.
Some systems though may have to deal with small and large data entangled.
If it's larger than a block (> 128KB), compressBlock() cannot compress them in one round.
That's why it's possible to compress in multiple rounds.
This is a chain of compressed blocks.
Some users push this capability to the limit, encoding gigantic chain of blocks.
On crossing the 4GB limit, some internal overflow occurs.
This fix moves the overflow correction mechanism higher in the call chain,
so that it's applied also to gigantic chains of blocks.
Added a test case in fuzzer.c, which crashes before the fix, and pass now.
* Updates CircleCI to use workflows.
We can now specify any number of test jobs to run in parallel.
* Switch the image to `buildpack-deps:trusty` which is only 500 MB
instead of 7 GB, so that saves 7 minutes to download it if it isn't
already cached on the host.
* Publish the source tarball and sha256sum as artifacts.
* If the `GITHUB_TOKEN` environment variable is set, we will also
add the tarball + sha256sum to the tagged release, after manual
approval.
Sometimes, it's necessary to test that a certain command fail, as expected.
Such failure is actually a success, and must not stop the flow of tests.
Several tests were prefixed with `!` to invert return code.
This does not work : it effectively makes the tests pass no matter what.
Use instead function die(), which is meant to trap successes, and transform them into errors.
which can be probed using new function ZSTD_minCLevel().
Also : redefined ZSTD_TARGETLENGTH_MIN/MAX for consistency
used the opportunity to bump version number to v1.3.6
tests/playTests.sh uses 'head -c' in a couple of tests to truncate the
last byte of a file. The '-c' option is non-portable (not in POSIX).
Instead use a wrapper around dd (truncateLastByte).
they were pretty easy to trigger by the way,
just start an extended paramgrill session
to find a compression table based on any sample,
it would necessarily happen at some point.
assert() in paramgrill are not in the benchmark path.
They should remain active, as they don't impact measurements, and their runtime is insignificant.
* Minor fix
* Run non-optimize FASTCOVER 5 times in benchmark
* Merge fastCover into dictBuilder
* Fix mixed declaration issue
* Add fastcover to symbol.c
* Add fastCover.c and cover.h to build
* Change fastCover.c to fastcover.c
* Update benchmark to run FASTCOVER in dictBuilder
* Undo spliting fastcover_param into cover_param and f
* Remove convert param functions
* Assign f to parameter
* Add zdict.h to Makefile in lib
* Add cover.h to BUCK
* Cast 1 to U64 before shifting
* Remove trimming of zero freq head and tail in selectSegment and rebenchmark
* Remove f as a separate parameter of tryParam
* Read 8 bytes when d is 6
* Add trimming off zero frequency head and tail
* Use best functions from COVER and remove trimming part(which leads to worse compression ratio after previous bugs were fixed)
* Add finalize= argument to FASTCOVER to specify percentage of training samples passed to ZDICT_finalizeDictionary
* Change nbDmer to always read 8 bytes even when d=6
* Add skip=# argument to allow skipping dmers in computeFrequency in FASTCOVER
* Update comments and benchmarking result
* Change default method of ZDICT_trainFromBuffer to ZDICT_optimizeTrainFromBuffer_fastCover
* Add dictType enum and fix bug about passing zParam when converting to coverParam
* Combine finalize and skip into a single parameter
* Update acceleration parameters and benchmark on 3 sample sets
* Change default splitPoint of FASTCOVER to 0.75 and benchmark first 3 sample sets
* Initialize variables outside of for loop in benchmark.c
* Update benchmark result for hg-manifest
* Remove cover.h from install-includes
* Add explanation of f
* Set default compression level for trainFromBuffer to 3
* Add assertion of fastCoverParams in DiB_trainFromFiles
* Add checkTotalCompressedSize function + some minor fixes
* Add test for multithreading fastCovr
* Initialize segmentFreqs in every FASTCOVER_selectSegment and move mutex_unnlock to end of COVER_best_finish
* Free segmentFreqs
* Initialize segmentFreqs before calling FASTCOVER_buildDictionary instead of in FASTCOVER_selectSegment
* Add FASTCOVER_MEMMULT
* Minor fix
* Update benchmarking result
Per warnings from flawfinder: "Does not check for buffer overflows when
copying to destination [MS-banned] (CWE-120). Consider using snprintf,
strcpy_s, or strlcpy (warning: strncpy easily misused).".
Replaced called to strcpy and strcat in `fileio.c` to calls with a
specified size (`strncpy` and `strncat`).
Tested the changes on OSX, Linux, Windows.
On OSX + Linux, changes were tested with ASAN. The following flags were
used: 'check_initialization_order=1:strict_init_order=1:detect_odr_violation=1:detect_stack_use_after_return=1'
To reproduce warning:
./flawfinder.py ./programs/fileio.c
Add different constraint types (decompression speed, compression memory, parameter constraints)
Separate search space by strategy + strategy selection
Memoize results
Real random restarts
Support multiple files
Support Dictionary inputs
Debug Macro for extra printing
Additional constraint checking
Minor fixes
more param parsing
Add Memory
Change paramVariation
work on feasibility
reformat bench
Changed Paramgrill to use bench.c benchmarking
customlevel macro
Printing Flag
Minor changes
Explicit casting
Makefile fix
casting, type fix
Printing Flag
Minor Changes
comments, helper fn's
The correct parameters are used once, but once `ZSTD_resetCStream()` is
called the default parameters (level 3) are used. Fix this by setting
`requestedParams` in the `ZSTD_initCStream*()` functions.
The added tests both fail before this patch and pass after.
OpenBSD's port building infrastructure is able to build in a privilege
separated mode. It uses a privilege drop model. Regression tests fail in
this mode as xz/lzma is unable to set file group and errors out with:
xz: tmp.xz: Cannot set the file group: Operation not permitted
gmake[1]: *** [Makefile:307: zstd-playTests] Error 2
Actually it is not a xz/lzma error but a warning causing zstd's
regression test to fail. Proposed fix is to have xz/lzma not set the
exit status to 2 even if a condition worth a warning was detected (-Q
flag).
https://github.com/facebook/zstd/pull/1124 fixes an issue with GNU/Hurd
being unable to write to /dev/zero. Implemented fix is writing to
/dev/random instead.
On OpenBSD a regular user is unable to write to /dev/random because of
permissions set on this device. Result is failing a regression test.
Proposed solution should work for all platforms.
[zstdmt] Fix jobsize bugs
* `ZSTDMT_serialState_reset()` should use `targetSectionSize`, not `jobSize` when sizing the seqstore.
Add an assert that checks that we sized the seqstore using the right job size.
* `ZSTDMT_compressionJob()` should check if `rawSeqStore.seq == NULL`.
* `ZSTDMT_initCStream_internal()` should not adjust `mtctx->params.jobSize` (clamping to MIN/MAX is okay).
streaming decoders, such as ZSTD_decompressStream() or ZSTD_decompress_generic(),
may end up making no forward progress,
(aka no byte read from input __and__ no byte written to output),
due to unusual parameters conditions,
such as providing an output buffer already full.
In such case, the caller may be caught in an infinite loop,
calling the streaming decompression function again and again,
without making any progress.
This version detects such situation, and generates an error instead :
ZSTD_error_dstSize_tooSmall when output buffer is full,
ZSTD_error_srcSize_wrong when input buffer is empty.
The detection tolerates a number of attempts before triggering an error,
controlled by ZSTD_NO_FORWARD_PROGRESS_MAX macro constant,
which is set to 16 by default, and can be re-defined at compilation time.
This behavior tolerates potentially existing implementations
where such cases happen sporadically, like once or twice,
which is not dangerous (only infinite loops are),
without generating an error, hence without breaking these implementations.
Seperate syntheticTest and fileTableTest (now renamed as benchFiles)
Add incremental display to benchMem
Change to only iterMode for benchFunction
Make Synthetic test's compressibility configurable from cli (using -P#)
from zstreamtest.
This test is now integrated within --newapi,
which dynamically switches between the 2 modes randomly.
The main outcome is reduced testing time.
-Remove global variables
-Remove gv setting functions
-Add advancedParams struct
-Add defaultAdvancedParams();
-Change return type of bench Files
-Change cli to use new interface
-Changed error returns to own struct value
-Change default compression benchmark to use decompress_generic
-Add CustomBench function
-Add Documentation for new functions
There were 2 competing set of debug functions
within zstd_internal.h and bitstream.h.
They were mostly duplicate, and required care to avoid messing with each other.
There is now a single implementation, shared by both.
Significant change :
The macro variable ZSTD_DEBUG does no longer exist,
it has been replaced by DEBUGLEVEL,
which required modifying several source files.
result of ZSTD_compress_advanced()
is different from ZSTD_compress_generic()
when using negative compression levels
because the disabling of huffman compression is not passed in parameters.
when parameters are "equivalent",
the context is re-used in continue mode,
hence needed workspace size is not recalculated.
This incidentally also evades the size-down check and action.
This patch intercepts the "continue mode"
so that the size-down check and action is actually triggered.
recently introduce into the new dictionary mode.
The bug could be reproduced with this command :
./zstreamtest -v --opaqueapi --no-big-tests -s4092 -t639
error was in function ZSTD_count_2segments() :
the beginning of the 2nd segment corresponds to prefixStart
and not the beginning of the current block (istart == src).
This would result in comparing the wrong byte.
ensure that, when frequency[symbol]==0,
result is (tableLog + 1) bits
with both upper-bit and fractional-bit estimates.
Also : enable BIT_DEBUG in /tests
ZSTD_decompress() can decompress multiple frames sent as a single input.
But the input size must be the exact sum of all compressed frames, no more.
In the case of a mistake on srcSize, being larger than required,
ZSTD_decompress() will try to decompress a new frame after current one, and fail.
As a consequence, it will issue an error code, ERROR(prefix_unknown).
While the error is technically correct
(the decoder could not recognise the header of _next_ frame),
it's confusing, as users will believe that the first header of the first frame is wrong,
which is not the case (it's correct).
It makes it more difficult to understand that the error is in the source size, which is too large.
This patch changes the error code provided in such a scenario.
If (at least) a first frame was successfully decoded,
and then following bytes are garbage values,
the decoder assumes the provided input size is wrong (too large),
and issue the error code ERROR(srcSize_wrong).
distance between levels is slightly increased
to compensate for level 1 speed improvements
and the will to have stronger level 19
extending the range of speed to cover.
reported by @let-def.
It's actually a bug in ZSTD_compressBegin_usingCDict()
which would pass a wrong pledgedSrcSize value (0 instead of ZSTD_CONTENTSIZE_UNKNOWN)
resulting in wrong window size, resulting in downsized seqStore,
resulting in segfault when writing into the seqStore later in the process.
Added a test in fuzzer to cover this use case (fails before the patch).
The new advanced API basically set `requestedParams = appliedParams` when
using a dictionary. This halted all parameter adjustment, which can hurt
compression ratio if, for example, the window log is small for the first
call, but the rest of the files are large.
This patch fixes the bug, and checks that the `requestedParams` don't change
in the new advanced API when using a dictionary, and generally in the fuzzer.
OpenBSD uses md5 instead of md5sum, and has no device called full.
With this patch, make check runs until #1088. With the assumption made
in the issue make check runs succesfully.
Summary:
Allocate a single input buffer large enough to house each job, as well as
enough space for the IO thread to write 2 extra buffers. One goes in the
`POOL` queue, and one to fill, and then block on a full `POOL` queue.
Since we can't overlap with the prefix, we allocate space for 3 extra
input buffers.
Test Plan:
* CI
* With and without ASAN/UBSAN run zstdmt with different number of threads
on two large binaries, and verify that their checksums match.
* Test on the tip of the zstdmt ldm integration.
Reviewers: cyan
Differential Revision: https://phabricator.intern.facebook.com/D7284007
Tasks: T25664120
The overflow protection is broken when the window log is `> (3U << 29)`, so 31.
It doesn't work when `current` isn't around `1U << windowLog` ahead of `lowLimit`,
and the the assertion `current > newCurrent` fails. This happens when the same
context is used many times over, but with a large window log, like in zstdmt.
Fix it by triggering correction based on `nextSrc - base` instead of `lowLimit`.
The added test fails before the patch, and passes after.
access negative compression levels from command line
for both compression and benchmark modes.
also : ensure proper propagation of parameters
through ZSTD_compress_generic() interface.
added relevant cli tests.
negative compression level trade compression ratio for more compression speed.
They turn off huffman compression of literals,
and use row 0 as baseline with a stepSize = -cLevel.
added associated test in fuzzer
also added : new advanced parameter ZSTD_p_literalCompression
This makes it easier to explain that nbWorkers=0 --> single-threaded mode,
while nbWorkers=1 --> asynchronous mode (one mode thread on top of the "main" caller thread).
No need for an additional asynchronous mode flag.
nbWorkers>=2 works the same as nbThreads>=2 previously.
When ZSTD_e_end directive is provided,
the question is not only "are internal buffers completely flushed",
it is also "is current frame completed".
In some rare cases,
it was possible for internal buffers to be completely flushed,
triggering a @return == 0,
but frame was not completed as it needed a last null-size block to mark the end,
resulting in an unfinished frame.
added some test
also updated relevant doc
+ fixed a mistake in `lz4` symlink support :
lz4 utility doesn't remove source files by default (like zstd, but unlike gzip).
The symlink must behave the same.
ZSTD_create?Dict() is required to produce a ?Dict* return type
because `free()` does not accept a `const type*` argument.
If it wasn't for this restriction, I would have preferred to create a `const ?Dict*` object
to emphasize the fact that, once created, a dictionary never changes
(hence can be shared concurrently until the end of its lifetime).
There is no such limitation with initStatic?Dict() :
as stated in the doc, there is no corresponding free() function,
since `workspace` is provided, hence allocated, externally,
it can only be free() externally.
Which means, ZSTD_initStatic?Dict() can return a `const ZSTD_?Dict*` pointer.
Tested with `make all`, to catch initStatic's users,
which, incidentally, also updated zstd.h documentation.
it still fallbacks to single-thread blocking invocation
when input is small (<1job)
or when invoking ZSTDMT_compress(), which is blocking.
Also : fixed a bug in new block-granular compression routine.
Pathological samples may result in literal section being incompressible.
This case is now detected,
and literal distribution is replaced by one that can be written into the dictionary.
constants in zstd.h should not depend on MIN() macro which existence is not guaranteed.
Added a test to check the specific constants.
The test is a bit too specific.
But I have found no way to control a more generic "are all macro already defined" condition,
especially as this is a valid construction (the missing macro might be defined later, intentionnally).
we want the dictionary table to be fully sorted,
not just lazily filled.
Dictionary loading is a bit more intensive,
but it saves cpu cycles for match search during compression.
Recipe in /tests rebuild everything from source for each target.
zstd is still a "small" project, so it's not prohibitive,
yet, rebuilding same files over and over represents substantial redundant work.
This patch replaces *.c files from /lib by their corresponding *.o files.
They cannot be compiled and stored directly within /lib,
since /tests triggers additional debug capabilities unwelcome in release binary.
So the resulting *.o are stored directly within /tests.
It turns out, it's difficult to find several target using *exactly* the same rules.
Using only the default rules (debug enabled, multi-threading disabled, no legacy)
a surprisingly small amount of targets share their work.
It's because, in many cases there are additional modifications requested :
some targets are 32-bits, some enable multi-threading, some enable legacy support,
some disable asserts, some want different kind of sanitizer, etc.
I created 2 sets of object files : with and without multithreading.
Several targets share their work, saving compilation time when running `make all`.
Also, obviously, when modifying one source file, only this one needs rebuilding.
For targets requiring some different setting, build from source *.c remain the rule.
The new rules have been tested within `-j` parallel compilation, and work fine with it.
params1 was swapped with params2.
This used to be a non-issue when testing for strict equality,
but now that some tests look for "sufficient size" `<=`, order matters.
zstd streaming API was adding a null-block at end of frame for small input.
Reason is : on small input, a single block is enough.
ZSTD_CStream would size its input buffer to expect a single block of this size,
automatically triggering a flush on reaching this size.
Unfortunately, that last byte was generally received before the "end" directive (at least in `fileio`).
The later "end" directive would force the creation of a 3-bytes last block to indicate end of frame.
The solution is to not flush automatically, which is btw the expected behavior.
It happens in this case because blocksize is defined with exactly the same size as input.
Just adding one-byte is enough to stop triggering the automatic flush.
I initially looked at another solution, solving the problem directly in the compression context.
But it felt awkward.
Now, the underlying compression API `ZSTD_compressContinue()` would take the decision the close a frame
on reaching its expected end (`pledgedSrcSize`).
This feels awkward, a responsability over-reach, beyond the definition of this API.
ZSTD_compressContinue() is clearly documented as a guaranteed flush,
with ZSTD_compressEnd() generating a guaranteed end.
I faced similar issue when trying to port a similar mechanism at the higher streaming layer.
Having ZSTD_CStream end a frame automatically on reaching `pledgedSrcSize` can surprise the caller,
since it did not explicitly requested an end of frame.
The only sensible action remaining after that is to end the frame with no additional input.
This adds additional logic in the ZSTD_CStream state to check this condition.
Plus some potential confusion on the meaning of ZSTD_endStream() with no additional input (ending confirmation ? new 0-size frame ?)
In the end, just enlarging input buffer by 1 byte feels the least intrusive change.
It's also a contract remaining inside the streaming layer, so the logic is contained in this part of the code.
The patch also introduces a new test checking that size of small frame is as expected, without additional 3-bytes null block.
- building cli from /tests preserves potential flags in MOREFLAGS (such as asan/usan)
- MT dictionary tests check for MT capability (MT is not enabled by default for zstd32)
windowLog is now enforced from provided compression parameters,
instead of being copied blindly from `cdict`
where it could be smaller.
also :
- fix a minor bug in zstreamtest --mt : advanced parameters must be set before init
- changed advanced parameter name to ZSTDMT_jobSize
-ftrapv is apparently buggy for gcc.
versions >= 5 are supposed to work better,
but even then, some complaints say it's still flaky when optimizations are enabled.
I even saw a post saying it only works if one creates its own signal handler,
which would make this flag no longer transparent.
on clang, it seems to work correctly.
But we would need to add a method to selectively add flags depending on compiler.
That's too much troubles for the intended benefit
(just catch integer overflows, which we can also do using ubsan).
merging of repcode search into btsearch introduced a small compression ratio regressio at max level :
1.3.2 : 52728769
after repMerge patch : 52760789 (+32020)
A few minor changes have produced this difference.
They can be hard to spot.
This patch buys back about half of the difference,
by no longer inserting position at hc3 when a long match is found there.
It feels strangely counter-intuitive, but works :
after this patch : 52742555 (-18234)
Fixed : multithreading to compress some small data with dictionary
Fixed : ZSTD_initCStream_usingCDict()
Improved streaming memory usage when pledgedSrcSize is known.
added some traces and assert
related to hunting a potential ubsan error in 32-bits more
(it ends up being a compiler-side issue : https://gcc.gnu.org/bugzilla/show_bug.cgi?id=82802).
Modified one pointer arithmetic expression for a more conformant way.
ZSTD_compress() and friends would treat an empty input as an unknown size
when selecting parameters. Thus, they would drastically overallocate the
context. Tell ZSTD_getParams() that the source size is 1 when it is empty.
UTIL_getFileSize() used to return zero on failure.
This made it impossible to distinguish a failure from a genuine empty file.
Both cases where coalesced.
Adding UTIL_FILESIZE_UNKNOWN constant has many consequences on user code,
since in many places, the `0` was assumed to mean "error".
This is no longer the case, and the error code must be actively checked.
It would previously exit when srcSize is unknown.
But in the case of custom parameters,
hLog and cLog can still be too large in comparison with windowLog.
Reduces maximum memory allocated during zstreamtest --newapi
It does not feel "right" from a dependency perspective.
ZSTD_initDCtx_internal() is triggered once, on DCtx creation,
while ZSTD_decompressBegin() is invoked at the beginning of each new frame,
and is also a user-facing prototype.
Downside : a DCtx must be init before first usage !
This was always the intention by the way, and is documented as such.
This stage is automatically done within ZSTD_decompress() and variants,
and also within ZSTD_decompressStream().
Only ZSTD_decompressContinue() is impacted,
it must be preceded by a ZSTD_decompressBegin(), as detailed in doc.
A test has been fixed, to no longer rely on undocumented assumption that ZSTD_decompressBegin() is invoked during init.
decoder output buffer would receive a wrong size.
In previous version, ZSTD_decompressStream() would blindly trust the caller that pos <= size.
In this version, this condition is actively checked,
and the function returns an error code if this condition is not respected.
This check could also be done with an assert(),
but since this is a user-facing interface, it seems better to keep this check at runtime.
* Enforce smaller maximum values for parameters
* Adjust parameters to the source size
The memory usage is reduced by about 5x, which makes the fuzzers run at
least twice as fast, even more so with ASAN/MSAN enabled.
* Maximum window size in 32-bit mode is 1GB, since allocations for 2GB fail
on my Mac.
* Maximum window size in 64-bit mode is 2GB, since that is the largest
power of 2 that works with the overflow prevention.
* Allow `--long=windowLog` to set the window log, along with
`--zstd=wlog=#`. These options also set the window size during
decompression, but don't override `--memory=#` if it is set.
* Present a helpful error message when the window size is too large during
decompression.
* The long range matcher defaults to a hash log 7 less than the window log,
which keeps it at 20 for window log 27.
* Keep the default long range matcher window size and the default maximum
window size at 27 for the API and CLI.
* Add tests that use the maximum window size and hash size for compression
and decompression.
for easier invocation.
- no longer expose frequency timer :
it's either useless, or stored internally in a static variable (init is only necessary once).
- UTIL_getTime() provides result by function return.
supporting function for bufferless streaming API (ZSTD_decompressContinue())
makes it possible to correctly size a round buffer for decoding using this API.
also : added field blockSizeMax within ZSTD_frameHeader,
as it's a necessary information to know when to restart at beginning of decoding buffer.
The zstd format specification doesn't enforce that Huffman compressed
literals (including the table) have to be smaller than the uncompressed
literals. The compressor will never Huffman compress literals if the
compressed size is larger than the uncompressed size. The decompresser
doesn't accept Huffman compressed literals with 4 streams whose compressed
size is at least as large as the uncompressed size.
* Make the decompresser accept Huffman compressed literals whose size
increases.
* Add a test case that exposes the bug. The compressed file has to be
statically generated, since the compressor won't normally produce files
that expose the bug.
Previously, each job would reserve a CCtx right before being posted.
The CCtx would be "part of the job description",
and only released when the job is completed (aka flushed).
For ZSTDMT_compress(), which creates all jobs first and only join at the end,
that meant one CCtx per job.
The nb of jobs used to be == nb of threads,
but since latest modification,
which reduces the size of jobs in order to spread the load of difficult areas,
it also increases the nb of jobs for large sources / small compression level.
This resulted in many more CCtx being created.
In this new version, CCtx are reserved within the worker thread.
It guaranteea there cannot be more CCtx reserved than workers (<= nb threads).
To do that, it required to make the CCtx Pool multi-threading-safe :
it can now be called from multiple threads in parallel.
Makes frame type (zstd,skippable) detection more straighforward.
ZSTD_getFrameHeader set frameContentSize=ZSTD_CONTENTSIZE_UNKNOWN to mean "field not present"
ZSTD_estimateCDictSize() now uses same arguments as ZSTD_createCDict()
ZSTD_estimateCDictSize_advanced() uses same arguments as ZSTD_createCDict_advanced()
ZSTD_estimateCCtx() is now a "simple" function,
taking int compressionLevel as single argument.
ZSTD_estimateCCtx_advanced() takes a CParams argument,
which is both more complete and more complex to generate.
--no-big-tests is typically used in combination with qemu-user-static
qemu-user-static allocated 4 GB of RAM upfront.
On 2 GB VM, this can degenerate into a crash.
It's not a problem as long as memory is not used.
But with multi-threading enabled, memory fragmentation kicks in,
so the amoung of RAM effectively touched increases,
and can pass beyond the 2 GB limit of the VM.
In single-threaded mode, there is no such issue :
memory requirement is smaller, and remains well-located,
so very little fragmentation is expected.
This modification should make `qemu-arm-static zstreamtests --newapi --no-big-tests`
work fine on Travis CI.
It makes it more difficult to directly cast the result of a function,
requiring to store the result in an intermediate variable.
It does not necessarily help readability,
and this restriction can be difficult to overcome in some constructions,
like some macros.
also : fixed minor Visual conversion warnings in datagencli.c
* upstream/dev: (305 commits)
added test for ZSTD_estimateCStreamSize()
changed variable name, for clarity
fixed ZSTD_estimateCStreamSize()
shortened ZSTD_createCStream_Advanced()
fixed symbols test
added ZSTD_estimateDStreamSize()
changed name frameParams into frameHeader
regroup memory usage function declarations
separated ZSTD_estimateCStreamSize() from ZSTD_estimateCCtxSize()
bumped version number
added ZSTD_estimateCDictSize() and ZSTD_estimateDDictSize()
Updated ZSTD_freeCCtx()
updated ZSTD_estimateCCtxSize()
Updated ZSTD_sizeof_CCtx()
merged CCtx and CStream as a single same object
cli : -d and -t do not stop after a failed decompression
added dev branch CircleCI badge
added dev branch Appveyor badge
keep dev branch status only
creates a binary archive without the `programs` directory
...
ZSTD_frameParams => ZSTD_frameHeader
ZSTD_getFrameParams() -> ZSTD_getFrameHeader()
The new naming is more distinctive from ZSTD_frameParameters,
which is used during compression.
ZSTD_frameHeader is clearer in its intention to described frame header content.
It also implies we are decoding a ZSTD frame, hence we are at decoding stage.
added a parameter streaming,
to estimate memory allocation size
when the CCtx is used for streaming (CStream).
Note : this function is not able to estimate
memory cost of a potential internal CDict
which can only happen when starting with ZSTD_initCStream_usingDict()
It now only uses compressionParameters as argument.
It produces many changes throughout user code,
though hopefully they tend to be simple :
just provide the cParams part from existing ZSTD_parameters.
Some programs might depend on ZSTD_createCDict_advanced() to pass frame parameters.
This change will force them to revisit this strategy and fix it,
since frame parameters are effectively silently ignored in current version.
because by definition srcSize is not known when using this prototype.
added relevant test
Note : this use was already working, because at a later stage
(both ZSTD_compressBegin_usingCDict() and ZSTD_copyCCtx())
pledgedSrcSize=0 is translated into "unknown", no matter the frame parameter.
This is not correct, but of little importance,
as the medium term plan is to no longer set fParams within CDict
This is now the regroup point for ZSTD_initCStream*() functions
ZSTD_initCStream_advanced() now properly checks for parameters validity.
Also : added <assert.h> usage inside zstd_compress.c
Needs ZSTD_DEBUG=1 macro to be triggered.
Will be triggered by default from `tests` directory
does no longer allocate temporary buffers
when there is enough room in dstBuffer to decompress directly there.
(previous method would skip that for 1st chunk only).
Also : fix ZSTD_compressBound() for small srcSize
