It's complaining about the `memcpy`s, saying:
"warning C4090: 'function': different 'const' qualifiers"
Let's try explicitly casting to the argument types...
Fixes:
Enable RLE blocks for superblock mode
Fix the limitation that the literals block must shrink. Instead, when we're within 200 bytes of the next header byte size, we will just use the next one up. That way we should (almost?) always have space for the table.
Remove the limitation that the first sub-block MUST have compressed literals and be compressed. Now one sub-block MUST be compressed (otherwise we fall back to raw block which is okay, since that is streamable). If no block has compressed literals that is okay, we will fix up the next Huffman table.
Handle the case where the last sub-block is uncompressed (maybe it is very small). Before it would skip superblock in this case, now we allow the last sub-block to be uncompressed. To do this we need to regenerate the correct repcodes.
Respect disableLiteralsCompression in superblock mode
Fix superblock mode to handle a block consisting of only compressed literals
Fix a off by 1 error in superblock mode that disabled it whenever there were last literals
Fix superblock mode with long literals/matches (> 0xFFFF)
Allow superblock mode to repeat Huffman tables
Respect ZSTD_minGain().
Tests:
Simple check for the condition in #2096.
When the simple_round_trip fuzzer enables superblock mode, it checks that the compressed size isn't expanded too much.
Remaining limitations:
O(targetCBlockSize^2) because we recompute statistics every sequence
Unable to split literals of length > targetCBlockSize into multiple sequences
Refuses to generate sub-blocks that don't shrink the compressed data, so we could end up with large sub-blocks. We should emit those sections as uncompressed blocks instead.
...
Fixes#2096
* adding long support for patch-from
* adding refPrefix to dictionary_decompress
* adding refPrefix to dictionary_loader
* conversion nit
* triggering log mode on chainLog < fileLog and removing old threshold
* adding refPrefix to dictionary_round_trip
* adding docs
* adding enableldm + forceWindow test for dict
* separate patch-from logic into FIO_adjustParamsForPatchFromMode
* moving memLimit adjustment to outside ifdefs (need for decomp)
* removing refPrefix gate on dictionary_round_trip
* rebase on top of dev refPrefix change
* making sure refPrefx + ldm is < 1% of srcSize
* combining notes for patch-from
* moving memlimit logic inside fileio.c
* adding display for optimal parser and long mode trigger
* conversion nit
* fuzzer found heap-overflow fix
* another conversion nit
* moving FIO_adjustMemLimitForPatchFromMode outside ifndef
* making params immutable
* moving memLimit update before createDictBuffer call
* making maxSrcSize unsigned long long
* making dictSize and maxSrcSize params unsigned long long
* error on files larger than 4gb
* extend refPrefix test to include round trip
* conversion to size_t
* making sure ldm is at least 10x better
* removing break
* including zstd_compress_internal and removing redundant macros
* exposing ZSTD_cycleLog()
* using cycleLog instead of chainLog
* add some more docs about user optimizations
* formatting
playTests.sh didn't work when `ZSTD_BIN` or `DATAGEN_BIN` had a space in
the path name. This happens for me because I split the cmake build
directory by compiler name, like "Clang 9.0.0".
The fix is to replace all instances of `$ZSTD` with the `zstd()`
function, and the replace `$DATAGEN` with `datagen()`. This will allow
us to change how we call zstd/datagen in the future without having to
change every callsite.
Tests all `.h`, `.c`, `.py`, and `Makefile` files for valid copyright
and license lines. Excludes a small number of exceptions (threading, and
divsufsort).
* Copyright does not contains `present`
* Copyright contains `Facebook, Inc`
* Copyright contains the current year
* License contains exactly the lines we expect
* All copyright lines now have -2020 instead of -present
* All copyright lines include "Facebook, Inc"
* All licenses are now standardized
The copyright in `threading.{h,c}` is not changed because it comes from
zstdmt.
The copyright and license of `divsufsort.{h,c}` is not changed.
* Removing symbols that are not being tested
* Removing symbols used in zstdcli, fileio, dibio and benchzstd
* Removing symbols used in zbuff and add test-zbuff to travis
* Removing remaining symbols and adding unit tests instead
* Removing symbols test entirely
* Make arugments optional and add --dict argument
* Removing accidental print statement
* Change to more likely scenario for dictionary compression benchmark
Super blocks must never violate the zstd block bound of input_size + ZSTD_blockHeaderSize. The individual sub-blocks may, but not the super block. If the superblock violates the block bound we are liable to violate ZSTD_compressBound(), which we must not do. Whenever the super block violates the block bound we instead emit an uncompressed block.
This means we increase the latency because of the single uncompressed block. I fix this by enabling streaming an uncompressed block, so the latency of an uncompressed block is 1 byte. This doesn't reduce the latency of the buffer-less API, but I don't think we really care.
* I added a test case that verifies that the decompression has 1 byte latency.
* I rely on existing zstreamtest / fuzzer / libfuzzer regression tests for correctness. During development I had several correctness bugs, and they easily caught them.
* The added assert that the superblock doesn't violate the block bound will help us discover any missed conditions (though I think I got them all).
Credit to OSS-Fuzz.
* Adding new cli endpoint --diff-from=
* Appveyor conversion nit
* Using bool set trick instead of direct set
* Removing --diff-from and only leaving --diff-from=#
* Throwing error when both dictFileName vars are set
* Clean up syntax
* Renaming diff-from to patch-from
* Revering comma separated syntax clean up
* Updating playtests with patch-from
* Uncommenting accidentally commented
* Updating remaining docs and var names to be patch-from instead of diff-from
* Constifying
* Using existing log2 function and removing newly created one
* Argument order (moving prefs to end)
* Using comma separated syntax
* Moving to outside #ifndef
* Allow zero sized buffers in `stream_decompress`. Ensure that we never have two
zero sized buffers in a row so we guarantee forwards progress.
* Make case 4 in `stream_round_trip` do a zero sized buffers call followed by
a full call to guarantee forwards progress.
* Fix `limitCopy()` in legacy decoders.
* Fix memcpy in `zstdmt_compress.c`.
Catches the bug fixed in PR #1939
The `numFiles` variable wasn't updated, so the fuzzer didn't do anything.
I did two things to fix this:
1. Remove the `numFiles` variable entirely.
2. Error if we can't open a file and print the number of files tested.
* Initial revised automated benchmarking script
* Updating nb_iterations and making loop infinite
* Allowing benchmarking params to be changed from cli
* Renaming old speed test
* Removing numpy dependency for cli
* Change filename and benchmakr on pr level
* Moving build outside loop and adding iterations param
* Moving benchmarking to seperate travis ci test
* Fixing typo and using unused variable
* Added mode labels and updated README accordingly
* Adding new mode 'current' that compraes facebook:dev against current hash
* Typo
* Reverting previous accidental diff
* Typo
* Adding frequency config variable to prevent github from blacklisting
* Added new argument for frequency of fetching new prs
* Updating documentation
* Adding fail logging for superblock flow
* Dividing by targetCBlockSize instead of blockSize
* Adding new const and using more acurate formula for nbBlocks
* Only do dstCapacity check if using superblock
* Remvoing disabling logic
* Updating test to make it catch more extreme case of previou bug
* Also updating comment
* Only taking compressEnd shortcut on non-superblock
Fixes a fuzz issue where dictionary_round_trip failed because the compressor was generating corrupt files thanks to zero weights in the table.
* Only setting loaded dict huf table to valid on non-zero
* Adding hasNoZeroWeights test to fse tables
* Forbiding nbBits != 0 when weight == 0
* Reverting the last commit
* Setting table log to 0 when weight == 0
* Small (invalid) zero weight dict test
* Small (valid) zero weight dict test
* Initializing repeatMode vars to check before zero check
* Removing FSE changes to seperate pr
* Reverting accidentally changed file
* Negating bool, using unsigned, optimization nit
/dev/null permissions were modified when using sudo rights.
This fixes this bug during decompression.
More importantly, this patch adds a test, triggered in TravisCI,
ensuring unaltered /dev/null permissions.
date(1) is used to display the last modification time of a file, which
is not supported on OpenBSD, FreeBSD and Darwin. Instead use stat(1).
Tested on OpenBSD.
* Silently skip dictionaries less than 8 bytes, unless using `ZSTD_dct_fullDict`.
This changes the compressor, which silently skips dictionaries <= 8 bytes.
* Allow repcodes that are equal to the dictionary content size, since it is in bounds.
* Adds the fuzzer
* Adds an additional `InputType` for the fuzzer
I ran the fuzzer for about 10 minutes and it found 2 bugs:
* Catches the original bug without any help
* Catches an additional bug with 8-byte dictionaries
* A copy-paste error made it so we weren't running the advanced/cdict
streaming tests with the old API.
* Clean up the old streaming tests to skip incompatible configs.
* Update `results.csv`.
The tests now catch the bug in #1787.
Compression ratio of fast strategies (levels 1 & 2)
was seriously reduced, due to accidental disabling of Literals compression.
Credit to @QrczakMK, which perfectly described the issue, and implementation details,
making the fix straightforward.
Example : initCStream with level 1 on synthetic sample P50 :
Before : 5,273,976 bytes
After : 3,154,678 bytes
ZSTD_compress (for comparison) : 3,154,550
Fix#1787.
To follow : refactor the test which was supposed to catch this issue (and failed)
* Fix `ZSTD_FRAMEHEADERSIZE_PREFIX` and `ZSTD_FRAMEHEADERSIZE_MIN` to
take a `format` parameter, so it is impossible to get the wrong size.
* Fix the places that called `ZSTD_FRAMEHEADERSIZE_PREFIX` without
taking the format into account, which is now impossible by design.
* Call `ZSTD_frameHeaderSize_internal()` with `dctx->format`.
* The added tests catch both bugs in `ZSTD_decompressFrame()`.
Fixes#1813.
* Remove the `make libFuzzer` target since it is broken and obsoleted
by `CC=clang CXX=clang++ ./fuzz.py build all --enable-fuzzer`. The
new `-fsanitize=fuzzer` is much better because it works with MSAN
by default.
* Improve the `./fuzz.py gen` command by making the input type explicit
when creating a new target.
* Update the `README` for `--enable-fuzzer`.
Fixes#1727.
to produce same content on both 32 and 64-bit platforms
by removing floating from literal table determination.
also : added checksum trace in compression control test,
so that it's easier to determine if test fails
as a consequence of compressing a different sample.
* [ldm] Fix bug in overflow correction with large job size
* [zstdmt] Respect ZSTDMT_JOBSIZE_MAX (1G in 64-bit mode)
* [test] Add test that exposes the bug
Sadly the test fails on our CI because it uses too much memory, so
I had to comment it out.
* tests: Fix shellcheck warnings in playTests.sh
* tests: Do not use ../programs which is relative to tests dirs
This commit fixes error when running playTests.sh in Meson.
Mesonbuild runs out of tree, so ./datagen not in `zstd/tests` dir,
it lies in <mesonbuilddir>/tests. This leads to ../programs invalid.
* tests: Replace relative paths for zstd/tests dir
* playTests: Set shell options explicitly, not in shebang
* playTests: Replace echo -e with printf
* meson: Fix test-zstd
Use std=gnu99 to build and test just like `make test`.
* meson: Fix legacy test
* meson: Enable testing in CI
Run build under release mode for faster test time.
* meson: Increase timeout time for test-zstream
Bugs:
* `ZSTD_DCtx_refPrefix()` didn't clear the dictionary after the first
use. Fix and add a test case.
* `ZSTD_DCtx_reset()` always cleared the dictionary. Fix and add a test
case.
* After calling `ZSTD_resetDStream()` you could no longer load a
dictionary, since the stage was set to `zdss_loadHeader`. Fix and add
a test case.
Cleanup:
* Make `ZSTD_initDStream*()` and `ZSTD_resetDStream()` wrap the new
advanced API, and add test cases.
* Document the equivalent of these functions in the advanced API and
document the unstable functions as deprecated.
benchfn used to rely on mem.h, and util,
which in turn relied on platform.h.
Using benchfn outside of zstd required to bring all these dependencies.
Now, dependency is reduced to timefn only.
This required to create a separate timefn from util,
and rewrite benchfn and timefn to no longer need mem.h.
Separating timefn from util has a wide effect accross the code base,
as usage of time functions is widespread.
A lot of build scripts had to be updated to also include timefn.
* `ZSTD_decompressDCtx()` did not use the dictionary loaded by
`ZSTD_DCtx_loadDictionary()`.
* Add a unit test.
* A stacked diff uses `ZSTD_decompressDCtx()` in the
`dictionary_round_trip` and `dictionary_decompress` fuzzers.
Zstd compression sometimes does different stuff when it has at least
`ZSTD_compressBound()` output bytes, or not. Half of the time fuzz with
`ZSTD_compressBound() - 1` output bytes. Ensure that we have at least
one byte of overhead by disabling either the dictionary ID or checksum.
`ZSTD_compress2()` wouldn't wait for multithreaded compression to
finish. We didn't find this because ZSTDMT will block when it can
compress all in one go, but it can't do that if it doesn't have enough
output space, or if `ZSTD_c_rsyncable` is enabled.
Since we will already sometimes block when using `ZSTD_e_end`, I've
changed `ZSTD_e_end` and `ZSTD_e_flush` to guarantee maximum forward
progress. This simplifies the API, and helps users avoid the easy bug
that was made in `ZSTD_compress2()`
* Found by the libfuzzer fuzzers.
* Added a test case that catches the problem.
* I will make the fuzzers sometimes allocate less than
`ZSTD_compressBound()` output space.
It wasn't using the ZSTD_CCtx_params correctly. It must actualize
the compression parameters by calling ZSTD_getCParamsFromCCtxParams()
to get the real window log.
Tested by updating the streaming memory usage example in the next
commit. The CHECK() failed before this patch, and passes after.
I also added a unit test to zstreamtest.c that failed before this
patch, and passes after.
* After loading a dictionary only create the cdict once we've started the
compression job. This allows the user to pass the dictionary before they
set other settings, and is in line with the rest of the API.
* Add tests that mix the 3 dictionary loading APIs.
* Add extra tests for `ZSTD_CCtx_loadDictionary()`.
* The first 2 tests added fail before this patch.
* Run the regression test suite.
The order you set parameters in the advanced API is not supposed to matter.
However, once you call `ZSTD_CCtx_refCDict()` the compression parameters
cannot be changed. Remove that restriction, and document what parameters
are used when using a CDict.
If the CCtx is in dictionary mode, then the CDict's parameters are used.
If the CCtx is not in dictionary mode, then its requested parameters are
used.
Introduces a new utility function `ZSTD_findFrameCompressedSize_internal` which
is equivalent to `ZSTD_findFrameCompressSize`, but accepts an additional output
parameter `bound` that computes an upper-bound for the compressed data in the frame.
The new API function is named `ZSTD_decompressBound` to be consistent with
`zstd_compressBound` (the inverse operation). Clients will now be able to compute an upper-bound for
their compressed payloads instead of guessing a large size.
Implements https://github.com/facebook/zstd/issues/1536.
* Move all ZSTDMT parameter setting code to ZSTD_CCtxParams_*Parameter().
ZSTDMT now calls these functions, so we can keep all the logic in the
same place.
* Clean up `ZSTD_CCtx_setParameter()` to only add extra checks where needed.
* Clean up `ZSTDMT_initJobCCtxParams()` by copying all parameters by default,
and then zeroing the ones that need to be zeroed. We've missed adding several
parameters here, and it makes more sense to only have to update it if you
change something in ZSTDMT.
* Add `ZSTDMT_cParam_clampBounds()` to clamp a parameter into its valid
range. Use this to keep backwards compatibility when setting ZSTDMT parameters,
which clamp into the valid range.
Test a positive compression level with uncompressed literals,
and a negative compression level with compressed literals.
I double checked the `results.csv` and made sure that the compressed
sizes make sense.
Pull request #1499 added a new test, which uses 'head -c'. The '-c'
option is non-portable (not in POSIX). Instead use 'dd'. Similar issue
has been resolved in the past (#1321).
fseek() doesn't indicate when it moves past the end of a file.
Consequently, if a file is truncated within its last block, the error would't be detected.
This PR adds a test scenario that induces this situation using a small compressed file of only one block in size.
This test is added to tests/playTests.sh
Check is implemented by ensuring that the filehandle position is equal to the filesize upon exit.
On Windows, the equivalent of `/dev/null` is `NUL`.
When tests are run under msys2/minGW,
the environment identifies itself as Windows,
hence the script uses `NUL` instead of `/dev/null`
but the environment will consider `NUL` to be a regular file name.
Consequently, `NUL` will be overwritten during tests,
triggering an error.
This patch uses flag `-f` to force such overwrite
passing the test.
as suggested in #1441.
generally U32 and unsigned are the same thing,
except when they are not ...
case : 32-bit compilation for MIPS (uint32_t == unsigned long)
A vast majority of transformation consists in transforming U32 into unsigned.
In rare cases, it's the other way around (typically for internal code, such as seeds).
Among a few issues this patches solves :
- some parameters were declared with type `unsigned` in *.h,
but with type `U32` in their implementation *.c .
- some parameters have type unsigned*,
but the caller user a pointer to U32 instead.
These fixes are useful.
However, the bulk of changes is about %u formating,
which requires unsigned type,
but generally receives U32 values instead,
often just for brevity (U32 is shorter than unsigned).
These changes are generally minor, or even annoying.
As a consequence, the amount of code changed is larger than I would expect for such a patch.
Testing is also a pain :
it requires manually modifying `mem.h`,
in order to lie about `U32`
and force it to be an `unsigned long` typically.
On a 64-bit system, this will break the equivalence unsigned == U32.
Unfortunately, it will also break a few static_assert(), controlling structure sizes.
So it also requires modifying `debug.h` to make `static_assert()` a noop.
And then reverting these changes.
So it's inconvenient, and as a consequence,
this property is currently not checked during CI tests.
Therefore, these problems can emerge again in the future.
I wonder if it is worth ensuring proper distinction of U32 != unsigned in CI tests.
It's another restriction for coding, adding more frustration during merge tests,
since most platforms don't need this distinction (hence contributor will not see it),
and while this can matter in theory, the number of platforms impacted seems minimal.
Thoughts ?
The problem was already masked,
due to no longer accepting tiny blocks for statistics.
But in case it could still happen with not-so-tiny blocks,
there is a stricter control which ensures that
nothing was already loaded prior to statistics collection.
* Add configs that test multithreading, LDM, and setting explicit
parameters.
* Update the `compress cctx` method to accept `ZSTD_parameters`.
* Compile against the multithreaded `libzstd.a`.
* Update `results.csv` for the new configs.
Unless you think there are more configs/methods I should test, I think
we have a fairly wide set of configs/methods, so I'll pause adding
more for now.
Compare the input and output files by their inode number and
refuse to open the output file if the input file is the same.
This doesn't work when (de)compressing multiple files to a single
file, but that is a very uncommon use case, mostly used for
benchmarking by me.
Fixes#1422.
* Fix `ZSTD_estimateCCtxSize()` with negative levels.
* Fix `ZSTD_estimateCStreamSize()` with negative levels.
* Add a unit test to test for this error.
The `--no-progress` flag disables zstd's progress bars, but leaves
the summary.
I've added simple tests to `playTests.sh` to make sure the parsing
works.
When we switched `ZSTD_SKIPPABLEHEADERSIZE` to a macro, the places where we do:
MEM_readLE32(ptr) + ZSTD_SKIPPABLEHEADERSIZE
can now overflow `(unsigned)-8` to `0` and we infinite loop. We now check
the frame size and reject sizes that overflow a U32.
Note that this bug never made it into a release, and was only in the dev branch
for a few days.
Credit to OSS-Fuzz
from overlapSizeLog.
Reasoning :
`overlapLog` is already used everwhere, in the code, command line and documentation.
`ZSTD_c_overlapSizeLog` feels unnecessarily different.
Dictionaries are prebuilt and saved as part of the data object.
The config decides whether or not to use the dictionary if it is
available. Configs that require dictionaries are only run with
data that have dictionaries. The method will skip configs that are
irrelevant, so for example ZSTD_compress() will skip configs with
dictionaries.
I've also trimmed the silesia source to 1MB per file (12 MB total),
and added 500 samples from the github data set with a dictionary.
I've intentionally added an extra line to the `results.csv` to make
the nightly build fail, so that we can see how CircleCI reports it.
Full list of changes:
* Add pre-built dictionaries to the data.
* Add `use_dictionary` and `no_pledged_src_size` flags to the config.
* Add a config using a dictionary for every level.
* Add a config that specifies no pledged source size.
* Support dictionaries and streaming in the `zstdcli` method.
* Add a context-reuse method using `ZSTD_compressCCtx()`.
* Clean up the formatting of the `results.csv` file to align columns.
* Add `--data`, `--config`, and `--method` flags to constrain each
to a particular value. This is useful for debugging a failure
or debugging a particular config/method/data.
ZSTD_compress_generic() is renamed ZSTD_compressStream2().
Note that, for the time being,
the "stable" API and advanced one use different parameter planes :
setting parameters using the advanced API does not influence ZSTD_compressStream()
and using ZSTD_initCStream() does not influence parameters for ZSTD_compressStream2().
The regression tests run nightly or on the `regression`
branch for convenience. The results get uploaded as the
artifacts of the job. If they change, check the diff
printed in the job. If all is well, download the new
results and commit them to the repo.
This code will only run on a UNIX like platform. It
could be made to run on Windows, but I don't think that
it is necessary. It also uses C99.
* data: This module defines the data to run tests on.
It downloads data from a URL into a cache directory,
checks it against a checksum, and unpacks it. It also
provides helpers for accessing the data.
* config: This module defines the configs to run tests
with. A config is a set of API parameters and a set of
CLI flags.
* result: This module is a helper for method that defines
the result type.
* method: This module defines the compression methods
to test. It is what runs the regression test using the
data and the config. It reports the total compressed
size, or an error/skip.
* test: This is the test binary that runs the tests for
every (data, config, method) tuple, and prints the
results to the output file and stderr.
* results.csv: The results that the current commit is
expected to produce.
answering #1407.
Also : removed obsolete function ZSTD_setDStreamParameter()
which could only be used with one parameter (DStream_p_maxWindowSize).
Now replaced by ZSTD_DCtx_setWindowSize() (which exists since a few revisions)
changed workspace parameter convention
to always provide workspaceSize,
so that size can be explicitly checked.
Also, use more enum to make the meaning of some parameters more explicit.
fix#1385
decompressing into NULL was an automatic error.
It is now allowed, as long as the content of the frame is empty.
Seems to simplify things for `arrow`.
Maybe some other projects rely on this behavior ?
fix#1379
decodecorpus was generating one extraneous byte when `nbSeq==0`.
This is disallowed by the specification.
The reference decoder was just skipping the extraneous byte.
It is now stricter, and flag such situation as an error.
and slightly refactored affected function.
Honestly, the formula calculating variance should get a second reviewing round,
it's not clear if it's correct.
We could allocate up to 2^28 bytes of memory when using 2 threads with
window log = 24. Now, we limit it to 2^26 bytes of memory when not running
big tests.
I chose max window log = 22 since that is the maximum source size when
big tests are disabled. Hopefully this will be enough to reduce or
eliminate the test failures.
experimental function ZSTD_compressBlock() is designed for very small data in mind,
for situation where saving the ~12 bytes of frame header can actually make a difference.
Some systems though may have to deal with small and large data entangled.
If it's larger than a block (> 128KB), compressBlock() cannot compress them in one round.
That's why it's possible to compress in multiple rounds.
This is a chain of compressed blocks.
Some users push this capability to the limit, encoding gigantic chain of blocks.
On crossing the 4GB limit, some internal overflow occurs.
This fix moves the overflow correction mechanism higher in the call chain,
so that it's applied also to gigantic chains of blocks.
Added a test case in fuzzer.c, which crashes before the fix, and pass now.
* Updates CircleCI to use workflows.
We can now specify any number of test jobs to run in parallel.
* Switch the image to `buildpack-deps:trusty` which is only 500 MB
instead of 7 GB, so that saves 7 minutes to download it if it isn't
already cached on the host.
* Publish the source tarball and sha256sum as artifacts.
* If the `GITHUB_TOKEN` environment variable is set, we will also
add the tarball + sha256sum to the tagged release, after manual
approval.
Sometimes, it's necessary to test that a certain command fail, as expected.
Such failure is actually a success, and must not stop the flow of tests.
Several tests were prefixed with `!` to invert return code.
This does not work : it effectively makes the tests pass no matter what.
Use instead function die(), which is meant to trap successes, and transform them into errors.
which can be probed using new function ZSTD_minCLevel().
Also : redefined ZSTD_TARGETLENGTH_MIN/MAX for consistency
used the opportunity to bump version number to v1.3.6
tests/playTests.sh uses 'head -c' in a couple of tests to truncate the
last byte of a file. The '-c' option is non-portable (not in POSIX).
Instead use a wrapper around dd (truncateLastByte).
they were pretty easy to trigger by the way,
just start an extended paramgrill session
to find a compression table based on any sample,
it would necessarily happen at some point.
assert() in paramgrill are not in the benchmark path.
They should remain active, as they don't impact measurements, and their runtime is insignificant.
