Commit Graph

12806 Commits

Author SHA1 Message Date
Riccardo Spagni
615079e2f4
allow for explicitly disabling AES-NI 2015-01-26 23:19:53 +02:00
Thomas Winget
9d52378029
Merge to keep up with upstream
Merge 'monero-project/master' with blockchain
2015-01-21 11:26:53 -05:00
Thomas Winget
acd4c369e4
Should fix std::min issues related to size_t 2015-01-19 17:39:38 -05:00
Thomas Winget
34883599bc
Add in-source lmdb to build process
Working on Linux, needs verified for other platforms but should be fine.
2015-01-18 18:30:31 -05:00
Thomas Winget
4e45fae9c3
Initial import of lmdb source 2015-01-18 16:18:15 -05:00
Riccardo Spagni
9e0516c1dd
Merge pull request #215
24d500c Add a --restricted-rpc flag to simplewallet (moneromooo-monero)
2015-01-15 14:03:48 +02:00
Riccardo Spagni
580e003357
Merge pull request #214
87839cd Allow get_bulk_payments to return all payments regardless of payment ID (moneromooo-monero)
2015-01-15 13:59:48 +02:00
Thomas Winget
5149286c0b
Merge #216
Fix seed node threaded DNS lookup
2015-01-14 20:39:57 -05:00
Thomas Winget
40e0b70075
Merge #22
Remove code previously made unused and marked unused
2015-01-14 17:41:46 -05:00
warptangent
f74792b778
Fix seed node threaded DNS lookup
Use copied value of seed node index during thread creation, not
reference.
- fixes segfault

Use boost:🧵:try_join_until() instead of an atomic flag result
variable for each thread.

Add and handle interrupt for thread timeout.
- fixes segfault where a thread exceeds requested timeout and tries to
  assign results to a referenced, but now out-of-scope, variable in
  the main thread.
2015-01-14 14:01:04 -08:00
warptangent
800d9b9247
Remove code previously made unused and marked unused 2015-01-14 13:41:57 -08:00
Thomas Winget
d43782f041 Merge pull request #21 from warptangent/fix_block_reorg
Fixes and additions for block reorganization
2015-01-12 14:24:18 -05:00
warptangent
0840c2fd7e
Fix height assertion in Blockchain::handle_alternative_block()
It expects the total number of blocks of main chain, not last block id
(off-by-one error).

This again behaves like the same height assertion done in original
implementation in blockchain_storage::handle_alternative_block().

This allows a reorganization to proceed after an alternative block has
been added.
2015-01-11 21:23:02 -08:00
warptangent
63051bea1c
Fix comparison between main and alternate chain's cumulative
difficulty.

This fixes the continual reorganization between a main and alternate
chain, using the same two latest blocks from each.

The check that cumulative difficulty of the alternate chain is bigger
than main's was not using main's last block, but incorrectly using the
passed-in block's previous block. main_chain_cumulative_difficulty was
being used in two different ways. This has been split up to keep use
of main_chain_cumulative_difficulty consistent.
2015-01-11 21:23:02 -08:00
warptangent
909ea81067
Remove a have_block() check so alternate block can be processed
Remove have_block() check from Blockchain::handle_block_to_main_chain().
Add logging to have_block().

This allows blockchain reorganization to proceed further.

have_block() check here causes an error after a blockchain reorganize
begins with error: "Attempting to add block to main chain, but it's
already either there or in an alternate chain."

While reorganizing to become the main chain, a block in the
alternative chain would be refused due to have_block() rightfully
finding it in the alternative chain. The reorganization would end in
rollback, restoring to previous blockchain.

Original implementation didn't call it here, and it doesn't appear
necessary to be called from here in this implementation either. When
needed, it appears it's called prior to handle_block_to_main_chain().
2015-01-11 21:23:02 -08:00
warptangent
4d0a94b20c
Complete implementation of transaction removal
Complete method BlockchainLMDB::remove_output()
  - use output index as the key for:
    m_output_indices, m_output_txs, m_output_keys
  - call new method BlockchainLMDB::remove_amount_output_index()

Add method to remove amount output index.
  - BlockchainLMDB::remove_amount_output_index()
  - for m_output_amounts

This also fixes the segfault when blockchain reorganization is
attempted.
2015-01-11 21:22:09 -08:00
warptangent
1701c26750
Use block index when obtaining block's difficulty for log statement
Use last block id, not number of blocks (off-by-one error).

Fixes error at start of blockchain reorganization: "Attempt to get
cumulative difficulty from height <XXXXXX> failed -- difficulty not in
db"
2015-01-11 19:57:46 -08:00
Riccardo Spagni
23c3d382c8
added monoermooo's gpg key 2015-01-11 15:49:07 +02:00
moneromooo-monero
24d500ce8e
Add a --restricted-rpc flag to simplewallet
It restricts RPC to a subset of "view only" commands. Kind of like
a poor man's view key replacement.
2015-01-11 12:11:43 +00:00
moneromooo-monero
87839cd484
Allow get_bulk_payments to return all payments regardless of payment ID
by giving an empty list of payment IDs.
2015-01-11 12:04:05 +00:00
Thomas Winget
030eab7a49 Merge pull request #20 from warptangent/fix_transfers
Fix transfers

Output indexing was being handled improperly.  These changes fix that.  Wallets (re-)created using this branch will need to be (re-)re-created in order to get correct output indices.
2015-01-09 20:04:47 -05:00
warptangent
4eba21fd48
Fix transfers to support mixins
Implement BlockchainLMDB::get_output_global_index()
- returns global output index for a given amount and amount output
  index.

Add information to debug statement for failed ring signature check
within Blockchain::check_tx_inputs()

Fixes bitmonerod RPC call "/getrandom_outs.bin" to return correct
output keys, used in creating a transaction with mixins.

TODO: get_output_global_index() could be refactored with part of
get_output_tx_and_index() as the latter uses the former's
functionality.  Keep track of LMDB read transaction.
2015-01-09 16:34:18 -08:00
warptangent
d045dfa7ce
Fix transfers (without mixins)
Fix Blockchain::get_tx_outputs_gindexs() to return amount output
indices.

Implement BlockchainLMDB::get_tx_amount_output_indices() and call it
from the function instead of BlockchainLMDB::get_tx_output_indices()

Previously, Blockchain::get_tx_outputs_gindexs() was instead returning
global output indices, which are internal to LMDB databases.

Allows bitmonerod RPC /get_o_indexes.bin to return the amount output
indices as expected.

Allows simplewallet refresh to set correct amount output indices for
incoming transfers. simplewallet can now construct and send valid
transactions (currently only without mixins).

This is a fix that doesn't require altering the structure of the
current LMDB databases.

TODO:

This can be done more efficiently by adding another LMDB database
(key-value table).

It's not used during regular transaction validation by bitmonerod. I
think it's currently used only or mainly by simplewallet for just its
own incoming transactions. So the current behavior is not a primary
bottleneck.

Currently, it's using the "output_amounts" database, walking through a
given amount's list of values, comparing each one to a given global
output index. The iteration number of the match is the desired result:
the amount output index. This is done for each global output index of
the transaction.

A tx's amount output indices can be stored in various other ways
allowing for faster lookup. Since a tx is only written once, there are
no special future write requirements for its list of indices.
2015-01-09 16:34:12 -08:00
Thomas Winget
429a740562
throw inline functions need to keep exception type
As it is useful for functions calling BlockchainDB functions to know
whether an exception is expected (attempting to get a block that doesn't
    exist and counting it missing if not, to save time checking if it
    does, for example), the inline functions throw{0,1} need to keep the
exception type information.

Slight comment update due to copy/paste failure.
2015-01-09 07:29:05 -05:00
Thomas Winget
14555eefd5
Fixes segfault in Blockchain::handle_alternative_block
This commit should fix the segfault in
Blockchain::handle_alternative_block, and also updates a few comments
that were either incorrect or incomplete.
2015-01-09 05:56:51 -05:00
Riccardo Spagni
24ddfa792e
Merge pull request #206
1b46226 std::atomic_flag has no copy/move constructor, can't have a vector (Thomas Winget)
df53c0a small typo in previous commit (Thomas Winget)
4a53898 DNS seed timeout and fallback (Thomas Winget)
2015-01-08 12:18:00 +02:00
Thomas Winget
5086ca1db5
add BlockchainDB tests to new cmake 2015-01-07 00:48:45 -05:00
Riccardo Spagni
6600966e30
Merge pull request #211
7de1a2d previous hash added to GBT (Riccardo Spagni)
2015-01-06 18:39:19 +02:00
Riccardo Spagni
7de1a2d57a
previous hash added to GBT 2015-01-06 18:37:10 +02:00
Thomas Winget
7374b81b23 Merge pull request #19 from warptangent/fix_tx_output
Obtain tx hash and tx output index from amount and output offset
2015-01-04 19:39:44 -08:00
Thomas Winget
4fa1a83f6e Merge pull request #18 from moneromooo-monero/blockchain
Blockchain
2015-01-04 19:39:43 -08:00
warptangent
c5c100c69b Obtain tx hash and tx output index from amount and output offset
Fixes problem of obtaining incorrect outputs used for tx input.

Reverts to earlier intended behavior that was fixed in previous
commit's split of get_output_tx_and_index into two functions.
2015-01-04 19:39:43 -08:00
Thomas Winget
c50cd95674 Fixes a bug with getting output metadata from BlockchainDB
Thanks to moneromooo-monero for spotting the bug.
2015-01-04 19:39:43 -08:00
moneromooo-monero
ad8200a573 db_lmdb: fix global index calculation off by 1
This finally fixes raw tx being accepted by the daemon.
2015-01-04 19:39:43 -08:00
Thomas Winget
c3fa07b44b update comments to reflect changed code 2015-01-04 19:39:43 -08:00
moneromooo-monero
57b80c541e db_lmdb: remove redundant checks 2015-01-04 19:39:43 -08:00
Thomas Winget
5baf9d9eb3 Merge pull request #17 from moneromooo-monero/blockchain
db_lmdb: catch attempt to remove block from an empty blockchain
db_lmdb: do not give the group database write permissions
2015-01-04 19:39:43 -08:00
moneromooo-monero
1362846dd7 blockchain_converter: add --testnet for converting testnet blockchain 2015-01-04 19:39:43 -08:00
moneromooo-monero
59d2b0ed1c db_lmdb: do not give the group database write permissions 2015-01-04 19:39:43 -08:00
moneromooo-monero
4c2a45288a db_lmdb: catch attempt to remove block from an empty blockchain
It would probably have thrown when not finding a block at
height 2^64-1, but better make things clear.
2015-01-04 19:39:43 -08:00
Thomas Winget
eaaaada797 Merge pull request #16 from moneromooo-monero/blockchain
db_lmdb: factor all the log+throw code paths
2015-01-04 19:39:42 -08:00
Thomas Winget
81c28c211c Merge pull request #15 from moneromooo-monero/blockchain
many const-correctness changes and code quality enhancements.  minor bugfix on block removal.
2015-01-04 19:39:42 -08:00
moneromooo-monero
3a3459d59b db_lmdb: factor all the log+throw code paths 2015-01-04 19:39:42 -08:00
Thomas Winget
53ce3c95d9 Merge pull request #14 from moneromooo-monero/blockchain
Blockchain

lots of const-correctness and more proper code, bug fix with syncing.
2015-01-04 19:39:42 -08:00
moneromooo-monero
3fcb8daf6e db_lmdb: factor the MDB_val setup code
It makes the code simpler, avoids possible copy/paste errors
(wrong sizeof, etc), and generally unclutters the calling code.
2015-01-04 19:39:42 -08:00
moneromooo-monero
198368b2e1 blockchain: fix wallet syncing from scratch
When the wallet syncs from the first block, it is fine to start
at the genesis block.
2015-01-04 19:39:42 -08:00
moneromooo-monero
609cf7fc92 blockchain_converter: a bit more user friendly output 2015-01-04 19:39:42 -08:00
moneromooo-monero
2b9f737872 blockchain_converter: only call data path function once 2015-01-04 19:39:42 -08:00
moneromooo-monero
1860658eec blockchain: do not append "testnet" to the data directory
It is already there (unless overridden via command line).
2015-01-04 19:39:42 -08:00
moneromooo-monero
1c578ad3f8 db_lmdb: remove block timestamp too when removing a block 2015-01-04 19:39:42 -08:00