Commit Graph

42 Commits

Author SHA1 Message Date
Lee Clagett
9867a913dc Store RPC SSL key/cert for consistent authentication between runs 2021-02-13 20:26:26 +00:00
sumogr
8656a8c9ff remove double includes 2020-05-11 13:53:17 +00:00
Lee Clagett
3b24b1d082 Added support for "noise" over I1P/Tor to mask Tx transmission. 2019-07-17 14:22:37 +00:00
Lee Clagett
bdfc63ae4d Add ref-counted buffer byte_slice. Currently used for sending TCP data. 2019-07-16 16:30:35 +00:00
Thomas Winget
155475d971
Add IPv6 support
new cli options (RPC ones also apply to wallet):
  --p2p-bind-ipv6-address (default = "::")
  --p2p-bind-port-ipv6    (default same as ipv4 port for given nettype)
  --rpc-bind-ipv6-address (default = "::1")

  --p2p-use-ipv6          (default false)
  --rpc-use-ipv6          (default false)

  --p2p-require-ipv4      (default true, if ipv4 bind fails and this is
                           true, will not continue even if ipv6 bind
                           successful)
  --rpc-require-ipv4      (default true, description as above)

ipv6 addresses are to be specified as "[xx:xx:xx::xx:xx]:port" except
in the cases of the cli args for bind address.  For those the square
braces can be omitted.
2019-07-31 20:04:57 -04:00
moneromooo-monero
65c4004963
allow blocking whole subnets 2019-07-16 11:35:53 +00:00
moneromooo-monero
c3cf930f75
abstract_tcp_server2: fix timeout on exit
When closing connections due to exiting, the IO service is
already gone, so the data exchange needed for a gracious SSL
shutdown cannot happen. We just close the socket in that case.
2019-04-12 18:13:31 +00:00
Lee Clagett
21eb1b0725 Pass SSL arguments via one class and use shared_ptr instead of reference 2019-04-07 00:44:37 -04:00
Lee Clagett
a3b0284837 Change SSL certificate file list to OpenSSL builtin load_verify_location
Specifying SSL certificates for peer verification does an exact match,
making it a not-so-obvious alias for the fingerprints option. This
changes the checks to OpenSSL which loads concatenated certificate(s)
from a single file and does a certificate-authority (chain of trust)
check instead. There is no drop in security - a compromised exact match
fingerprint has the same worse case failure. There is increased security
in allowing separate long-term CA key and short-term SSL server keys.

This also removes loading of the system-default CA files if a custom
CA file or certificate fingerprint is specified.
2019-04-06 23:47:06 -04:00
Martijn Otto
057c279cb4
epee: add SSL support
RPC connections now have optional tranparent SSL.

An optional private key and certificate file can be passed,
using the --{rpc,daemon}-ssl-private-key and
--{rpc,daemon}-ssl-certificate options. Those have as
argument a path to a PEM format private private key and
certificate, respectively.
If not given, a temporary self signed certificate will be used.

SSL can be enabled or disabled using --{rpc}-ssl, which
accepts autodetect (default), disabled or enabled.

Access can be restricted to particular certificates using the
--rpc-ssl-allowed-certificates, which takes a list of
paths to PEM encoded certificates. This can allow a wallet to
connect to only the daemon they think they're connected to,
by forcing SSL and listing the paths to the known good
certificates.

To generate long term certificates:

openssl genrsa -out /tmp/KEY 4096
openssl req -new -key /tmp/KEY -out /tmp/REQ
openssl x509 -req -days 999999 -sha256 -in /tmp/REQ -signkey /tmp/KEY -out /tmp/CERT

/tmp/KEY is the private key, and /tmp/CERT is the certificate,
both in PEM format. /tmp/REQ can be removed. Adjust the last
command to set expiration date, etc, as needed. It doesn't
make a whole lot of sense for monero anyway, since most servers
will run with one time temporary self signed certificates anyway.

SSL support is transparent, so all communication is done on the
existing ports, with SSL autodetection. This means you can start
using an SSL daemon now, but you should not enforce SSL yet or
nothing will talk to you.
2019-03-05 14:16:08 +01:00
Riccardo Spagni
c83e80c263
Merge pull request #5162
4d3b61a3 Use io_service::work in epee tcp server (Lee Clagett)
2019-03-04 21:33:48 +02:00
Lee Clagett
4d3b61a31b Use io_service::work in epee tcp server 2019-02-10 13:40:32 -05:00
moneromooo-monero
2456945408
epee: add SSL support
RPC connections now have optional tranparent SSL.

An optional private key and certificate file can be passed,
using the --{rpc,daemon}-ssl-private-key and
--{rpc,daemon}-ssl-certificate options. Those have as
argument a path to a PEM format private private key and
certificate, respectively.
If not given, a temporary self signed certificate will be used.

SSL can be enabled or disabled using --{rpc}-ssl, which
accepts autodetect (default), disabled or enabled.

Access can be restricted to particular certificates using the
--rpc-ssl-allowed-certificates, which takes a list of
paths to PEM encoded certificates. This can allow a wallet to
connect to only the daemon they think they're connected to,
by forcing SSL and listing the paths to the known good
certificates.

To generate long term certificates:

openssl genrsa -out /tmp/KEY 4096
openssl req -new -key /tmp/KEY -out /tmp/REQ
openssl x509 -req -days 999999 -sha256 -in /tmp/REQ -signkey /tmp/KEY -out /tmp/CERT

/tmp/KEY is the private key, and /tmp/CERT is the certificate,
both in PEM format. /tmp/REQ can be removed. Adjust the last
command to set expiration date, etc, as needed. It doesn't
make a whole lot of sense for monero anyway, since most servers
will run with one time temporary self signed certificates anyway.

SSL support is transparent, so all communication is done on the
existing ports, with SSL autodetection. This means you can start
using an SSL daemon now, but you should not enforce SSL yet or
nothing will talk to you.
2019-02-02 20:05:33 +00:00
Lee Clagett
973403bc9f Adding initial support for broadcasting transactions over Tor
- Support for ".onion" in --add-exclusive-node and --add-peer
  - Add --anonymizing-proxy for outbound Tor connections
  - Add --anonymous-inbounds for inbound Tor connections
  - Support for sharing ".onion" addresses over Tor connections
  - Support for broadcasting transactions received over RPC exclusively
    over Tor (else broadcast over public IP when Tor not enabled).
2019-01-28 23:56:33 +00:00
Riccardo Spagni
c00ac446fd
Merge pull request #4854
bd98e99c Removed a lot of unnecessary includes (Martijn Otto)
2018-12-04 17:08:42 +02:00
Martijn Otto
bd98e99c80
Removed a lot of unnecessary includes 2018-11-15 17:29:34 +01:00
Martijn Otto
7c298f5d14
No longer use a list for registering self references in the abstract tcp
server

Updated assert message

Use a local variable that won't destruct at the end of the if-branch

Updated comment
2018-11-07 11:21:52 +01:00
moneromooo-monero
144a6c32c9
abstract_tcp_server2: move m_period to subclass
This is where it is actually used, and initialized
2018-10-02 17:28:48 +00:00
moneromooo-monero
979105b298
abstract_tcp_server2: fix race on shutdown 2018-07-15 19:08:49 +01:00
moneromooo-monero
55c7fb87a9
epee: adaptive connection timeout system
a connection's timeout is halved for every extra connection
from the same host.

Also keep track of when we don't need to use a connection
anymore, so we can close it and free the resource for another
connection.

Also use the longer timeout for non routable local addresses.
2018-06-10 19:39:38 +01:00
moneromooo-monero
4d15864728
abstract_tcp_server2: timeout on RPC connections 2018-05-26 20:18:36 +01:00
moneromooo-monero
2e3e90acbe
pass large parameters by const ref, not value
Coverity 136394 136397 136409 136526 136529 136533 175302
2018-02-02 19:36:09 +00:00
moneromooo-monero
bb89ae8b20
move connection_basic and network_throttle from src/p2p to epee
These even had the epee namespace.
This fixes some ugly circular dependencies.
2017-12-16 23:28:43 +00:00
Tim L
fa51408272 RPC: get_info add rpc_connections_count 2017-11-07 16:34:49 -05:00
moneromooo-monero
80d361c795
abstract_tcp_server2: improve tracking/cancelling of early connections
We don't actually need to keep them past the call to start, as this
adds them to the config object list, and so they'll then be cancelled
already when the stop signal arrives. This allows removing the periodic
call to cleanup connections.
2017-08-16 15:41:34 +01:00
moneromooo-monero
072102cfd2
abstracted nework addresses
All code which was using ip and port now uses a new IPv4 object,
subclass of a new network_address class. This will allow easy
addition of I2P addresses later (and also IPv6, etc).
Both old style and new style peer lists are now sent in the P2P
protocol, which is inefficient but allows peers using both
codebases to talk to each other. This will be removed in the
future. No other subclasses than IPv4 exist yet.
2017-05-27 11:35:54 +01:00
moneromooo-monero
5833d66f65
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.

To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:

This one is (mostly) silent, only outputting fatal errors:

MONERO_LOGS=*:FATAL

This one is very verbose:

MONERO_LOGS=*:TRACE

This one is totally silent (logwise):

MONERO_LOGS=""

This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):

MONERO_LOGS=*:WARNING,verify:FATAL

Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE

Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:

MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE

Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.

Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.

The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-16 00:25:46 +00:00
NanoAkron
6390673137 Removed all code related to fast_exit 2016-10-03 02:06:55 +01:00
redfish
72287d121a contrib: epee: add missing noexcept spec to class decl
The noexcept specs were added to make GCC 6.1.1 happy (#846), but this
one was missing (because GCC did not complain about it on Linux, but
does complain on OSX).
2016-06-22 09:05:53 -04:00
Howard Chu
b937a2c915 Use boost::thread instead of std::thread
and all other associated IPC
2016-03-11 15:09:50 +00:00
moneromooo-monero
22581a0441
epee: regularly cleanup connections we kept a reference to
Since connections from the ::connect method are now kept in
a deque to be able to cancel them on exit, this leaks both
memory and a file descriptor. Here, we clean those up after
30 seconds, to avoid this. 30 seconds is higher then the
5 second timeout used in the async code, so this should be
safe. However, this is an assumption which would break if
that async code was to start relying on longer timeouts.
2015-12-23 11:19:16 +00:00
moneromooo-monero
1e2f2d7da0
epee: fix hang on exit
When the boost ioservice is stopped, pending work notifications
will not happen. This includes deadline timers, which would
otherwise time out the now cancelled I/O operations. When this
happens just after starting a new connect operation, this can
leave that operations in a state where it won't receive either
the completion notification nor a timeout, causing a hang.

This is fixed by keeping a list of connections corresponding
to the connect operations, and cancelling them before stopping
the boost ioservice.

Note that the list of these connections can grow unbounded, as
they're never cleaned up. Cleaning them up would involve
working out which connections do not have any pending work,
and it's not quite clear yet how to go about this.
2015-12-22 12:39:02 +00:00
rfree2monero
32c19c6c3d
[fix] log level change. compilation: dns, tests
old unbound #warning does not block compilation
unit tests build fine. Even though the RPC/P2P network type is required again
2015-04-10 16:54:21 +02:00
rfree2monero
9bfa593eee [fix] Network 1.8: unlimited the RPC connections
works for unit tests build, too
2015-04-08 19:54:07 +02:00
rfree2monero
5ce4256e3d 2014 network limit 1.1 +utils +toc -doc -drmonero
Update of the PR with network limits

works very well for all speeds
(but remember that low download speed can stop upload
because we then slow down downloading of blockchain
requests too)

more debug options

fixed pedantic warnings in our code
should work again on Mac OS X and FreeBSD
fixed warning about size_t
tested on Debian, Ubuntu, Windows(testing now)

TCP options and ToS (QoS) flag
FIXED peer number limit
FIXED some spikes in ingress/download
FIXED problems when other up and down limit
2015-02-20 22:13:00 +01:00
rfree2monero
eabb519605 2014 network limit 1.0a +utils +toc -doc -drmonero
commands and options for network limiting
works very well e.g. for 50 KiB/sec up and down
ToS (QoS) flag
peer number limit
TODO some spikes in ingress/download
TODO problems when other up and down limit
added "otshell utils" - simple logging (with colors, text files channels)
2015-02-20 22:13:00 +01:00
Riccardo Spagni
fdae09754e increase ABSTRACT_SERVER_SEND_QUE_MAX_COUNT to a more sane value 2014-09-15 15:41:07 +02:00
fluffypony
32f9d2b783 move modified epee code to new classes, revert license 2014-07-25 18:29:08 +02:00
fluffypony
6fc995fe5d License updated to BSD 3-clause 2014-07-23 15:03:52 +02:00
mydesktop
79a4bedc36 mac osx building fixes 2014-04-30 16:50:06 -04:00
Antonio Juarez
8efa1313f3 some fixes 2014-03-20 11:46:11 +00:00
Antonio Juarez
296ae46ed8 moved all stuff to github 2014-03-03 22:07:58 +00:00